Check Film Sensor Manually.; Cannot Insert Film, Or Unit Does Not Activate When Film Is Inserted - JPI JP-33 Service Manual

Technical Support
Troubleshooting general problems
1-1. Problem

Cannot insert film, or unit does not activate when film is inserted.

Check Film Sensor manually.

Film Sensor is located inside the Feed Tray.
: It can easily be seen and accessed when feed tray cover is opened.
Check the operation of the sensor by a dummy film inserting.
: If the magnetic sensor is not working properly because of obstructions, sensor bar can
not sensing (: up) or recovering position (: down).
You can repair a obstruction by sensor adjusting.
You check wiring by bellow diagram.
JP-33 SERVICE MANUAL
- -
16
- Trouble Shooting