insys icom Pocket ISDN Manual page 60

ISDN Error Messages
Cause (hex) Meaning
3007 B channel protocol combination not supported
3008 NCPI not supported
3009 Unknown CIP value
300A Flags not supported
300B Facility not supported
300C Data length not supported
300D Reset procedure not supported
3301 Protocol error layer 1
3302 Protocol error layer 2, e.g. DTE address not
valid, TEI not valid
3303 Protocol error layer 3
3304 Another application has accepted the call
3311 Fax remote station is no fax
3312 Fax training terminated with error
3313 Fax connection termination before data trans-
mission
3314 Fax connection termination remote termination
3315 Fax connection termination remote procedure
3316 Fax connection termination "local transmitter
underrun"
3317 Fax connection termination "local receiver over-
flow"
3318 Fax connection termination "local abort"
3319 Fax invalid send data
3481 Unallocated (unassigned) number
3482 No route to transit network
3483 No route to destination
3486 Channel unacceptable
3487 Call awarded and being delivered in an estab-
lished channel
3490 Normal call clearing
3491 User busy
3492 No user responding
3493 No answer from user (user alerted)
3494 No answer from user (device off)
3495 Call rejected
3496 Number changed
349A Non selected user clearing
349B Destination out of order
60
INSYS Pocket ISDN
AT response X.25 response
3 13, 78
3 0D, 78
3 0D, 78
6 05, 78
6 05, 78
3 00, 78
7 01, 78
8 09, 78
8 09, 78
8 09, 78
8 21, 78
3 0D, 78
3 00, 78
8 09, 78