Pixapro Soft Light LED Series Manual

PIXAPRO

Warning And Notes

1. The ORTA600B is best used in a dry and well-ventilated environment.
2. Please DO NOT expose to rain or moisture, to avoid short-circuit.
3. Please DO NOT use with power-adapters not designed specifically with the ORTA600B.
4. It's normal the ORTA600B to get a little warm whilst in operation.
5. Please avoid any sudden shocks during transportation and/or installation, as impact damage
may cause deformation and damage to the light.
6. Please DO NOT look directly into the light whilst light is on.
7. Please DO NOT place the light near flammable substances, such as alcohol or gasoline or
other volatile solvents.
8. Please use the soft dry cloth to clean the light. You can wipe with a cloth with some neutral
detergent to remove difficult to remove stains, and then dry with a soft cloth.
9. Keep the light out of reach from children.
10. DO NOT attempt to repair light. If your ORTA600B develops a fault, as doing so will VOID
your warranty. Please contact us at customerservice@essentialphoto.co.uk.
11. DO NOT dismantle the head unit unless work is carried out by a qualified technician.
Dismantling your ORTA600B will VOID your warranty.
12. ENSURE the device is properly disconnected the power supply when the light is not in use,
before mounting or during maintenance
Note:The technical data are subject to change without notice.
Manual For Soft Light LED Series
PIXAPRO