Pixapro LECO500 II RGB Instruction Manual

Pixapro

Warning and Notes

1.The environment should be kept dry and ventilated when using the light.
2.Please do not let the device be exposed to rain or moisture, to avoid circuit problem.
3.Please do not use the light with over- rated voltage.
4.It's normal the fixture will be a little hot when working.
5.During transportation and installation process, please do not hit against other items, or else it may
cause deformation to the lamp shade and damage to the light.
6.Please do not directly look at the light bulb with naked eyes when the light is on.
7.Please do not place the light near by such as alcohol or gasoline and other flammable or volatile
solvents.
8.Please use the soft dry cloth to clean the light. You can wash with a cloth with some neutral
detergent to remove the dirt that is difficult to remove, and then dry with a soft cloth.
9. Keep the light out of reach from children.
10.Do not disassemble equipment. Touch the product's internal part could result in injury. In the
event of malfunction, the product should be repaired only by a qualified technician.
11. Please cut off power when the light isn't used for long time.
12. Please note the precautions, or could result in injury.
PiXAPRO
Unit 5 Sterling Park
Pedmore Road
Brierley Hill
United Kingdom
DY5 1TB
Note:The technical data are subject to change without notice.
LECO500 II RGB
Instruction Manual
Pixapro