Pixapro LED S300D PRO Manual

FCC Warning Statement:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against interference in a residential installa-
tion. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this equipment
does cause interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warm tips: Please read the manual carefully before operation. The technical parameters in
the instruction manual refer to the calculation data tested under a specific working environ-
ment and the normal temperature (23°C). The company reserves the interpretation right of the
instruction manual and the right of improving the products described in the instruction manual
without the prior notice. The document has been carefully checked for accuracy. The compa-
ny isn't liable to any consequences due to the differences caused by printing or translation.
The products' photos in the document maybe a little different from the appearance of actual
products and thus the actual products shall prevail. As the product updates continuously, there
maybe some differences in different batches, all in kind prevail, hope kindly understand.
Thank you for purchasing the PIXAPRO LEDS300D
The LEDS300D LED studio light, has a high CRI of ≥95. It features step-less
power adjustment and supports a 2.4GHz wireless remote control. Built-in
professional cooling system with super-silent fan. The S300D also features
an S-type mount, enabling it to be used with a wide range of different light-
ing modifiers for a large array of lighting possibilities. It can meet the lighting
demands in professional and commercial photography, video and film.