Related Manuals for Ikegami ULE-217A
Summary of Contents for Ikegami ULE-217A
-
Page 1: Instruction Manual
INSTRUCTION MANUAL 21.5 INCH LED SDI MONITOR ULE-217A Model Please read this manual thoroughly before use, and keep it handy for future reference. -
Page 3: Table Of Contents
CONTENTS SAFETY INSTRUCTION ………………………………………………………….………… 2 ~ 3 CAUTIONS ……………………………………………………………......... FCC RF INTERFERENCE STATEMENT ……………………………......CHECKING CONTROL BUTTONS/NAMES & FUNCTIONS OF I/O PORTS ………… REMOTE FUNCTIONS ……………………………………………………………………… MENU TREE & CONTROL ….……………………………………………………………… TO GET STARTED ………………….………………………………………………………. MENU CONTROLS AND FUNCTIONS …………………………………………...………. 10 ~ 16 SPECIFICATION ……………………………………..………………………………………... -
Page 4: Safety Instruction
SAFETY INSTRUCTION Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s Instructions. - Page 5 SAFETY INSTRUCTION The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus 14 Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.”...
-
Page 6: Cautions
CAUTIONS CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à... -
Page 7: Fcc Rf Interference Statement
FCC RF INTERFERENCE STATEMENT NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 8: Checking Control Buttons/Names & Functions Of I/O Ports
CHECKING CONTROL BUTTONS / NAMES & FUNCTIONS OF I/O PORTS Checking Control Buttons 1. Power 2. Auto 3. Enter 4. Up 5. Down 6. Menu 7. Source 2. Names and Functions of I/O Ports 1. DC 12V In 6. YPbPr 2. -
Page 9: Remote Functions
REMOTE FUNCTIONS Remote Controller(Optional) 1. POWER( Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Selects an input source. 3. AUTO Auto geometry adjustment in the RGB-PC source. 4. HOLD Unavailable 5. -
Page 10: Menu Tree & Control
MENU TREE & CONTROL 1. Menu Tree Main menu includes 1) Picture Settings 2) Color Settings 3) Audio Settings 4) Marker Setting 5) System Settings The picture above shows Picture Settings menus in S2V monitor. 2. Menu Control Menu control can be handled by front keys 1) Menu 2) Up 3) Down... -
Page 11: To Get Started
TO GET STARTED To get ULE-217A monitor started, connect required power and choice of your input signal. Turn on the power button on the front. 1) To choose the input signal after cable connection, please use Source button on front. -
Page 12: Menu Controls And Functions
Aperture - used to control sharpness level from 0 to 24 (0 for smooth and 24 for edge) - ULE-217A recommend to use internal pattern edge for easier selection NTSC Setup - used to control the difference black level when NTSCJ for Japan is used... - Page 13 MENU CONTROLS AND FUNCTIONS 2. Color Settings Color Temp - used to control color temperature - users can choose 3200K, 6500K, 9300K, User 1, User 2, and User 3 - in user # mode, users can define RGB Gain and Bias values for own purpose Gain Red/Green/Blue - changes only in user # mode - used to set R/G/B Gain level from -128 to 128...
- Page 14 MENU CONTROLS AND FUNCTIONS 3. Audio Settings Volume - used to control volume level of the internal speaker or audio out on the back of the monitor from 0 to 100 - shown in grey as it can be controlled by front knobs without entering the menu Source Select - used to select between Internal and External source of audio - when an external source is connected to audio in, select External...
- Page 15 MENU CONTROLS AND FUNCTIONS 3. Audio Settings (Continued) Sound Channel (SDI) - used to set embedded audio channel for internal speaker or Audio Out - select from CH1, CH2, CH1+CH2, CH3, CH4, CH3+CH4, CH5, CH6, CH5+CH6, CH7, CH8, CH7+CH8, CH9, CH10, CH9+CH10, CH11, CH12, CH11+CH12, CH13, CH14, CH13+CH14, CH15, CH16, and CH15+CH16 - when CH1 is chosen, user can hear CH1 from both speakers.
- Page 16 MENU CONTROLS AND FUNCTIONS 4. Marker Settings Marker On/Off - used to activate the marker function - Marker should be ON to use any features in Marker Setting menu Line Marker - used to select user’s desired marker type - available in off, 16:9, 4:3, 4:3(on air), 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1 and 4:3 Center Marker - used to turn on and off center marker Safety Area...
- Page 17 MENU CONTROLS AND FUNCTIONS 5. System Settings Scan - used to change the scan mode among zero scan, over scan, and pixel to pixel - wen pixel to pixel is on, turn the main jog to move the position - when system setting is in pixel to pixel, marker features don't work Aspect - used to change the display ratio among full screen, 16:9, and 4:3 Blue/Mono...
- Page 18 MENU CONTROLS AND FUNCTIONS 6. System Settings (Continued) Power Saving - select between off and DPMS - when DPMS is selected and there's no input signal for longer than 15sec, monitor takes sleep mode - LED light on front: red-power off, green-power on, orange blink-no input, orange-DPMS(sleep mode) Factory Reset - used to reset the monitor to factory default setting - 16 -...
-
Page 19: Specification
SPECIFICATION ULE-217A Display Screen Size 21.5" Max Resolution 1920 X 1080 Pixel Pitch 0.08265mm X 0.24795mm Brightness 250cd/ (Typical) Contrast Ratio 1000:1 Aspect Ratio 16:9 Viewing Angle (H/V) 170°/160° Color Depth 16.7M Input Connector 1 x BNC SDI (SD/HD/3G) 3 x BNC... - Page 20 Dimensions Outline Dimension 20.27” x 15.35” x 1.96 (W x H x D) (515mm x 390mm x 50mm) 5.42Kg (11.95 lbs) Net Weight General Electrical Ratings 3.3A Operating Temperature 0~40 (32~104 ) - 18 -...
-
Page 21: Dimension
DIMENSION (Unit: mm) - 19 -... -
Page 22: Troubleshooting Guide
TROUBLESHOOTING GUIDE WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. - Page 23 MEMO...
- Page 24 MEMO...
- Page 26 Ikegami Tsushinki Co., Ltd. 5-6-16 Ikegami, Ohta-ku, Tokyo, Japan 146-8567 Phone:(03)5700-1111 Fax:(03)5700-1137 Ikegami Electronics (U.S.A), Inc. 300 Route 17 South, Mahwah, NJ 07430 Phone:(201)368-9171, Fax:(201)569-1626 Ikegami Electronics (Europe) GmbH Ikegami Strasse 1, D-41460 Neuss, Germany Phone:(02131)123-0, Fax:(02131)102820 Property of L39ME0451 Rev.0...