Related Manuals for Ikegami ULE-217
Summary of Contents for Ikegami ULE-217
- Page 1 INSTRUCTIONS MANUAL 21.5 INCH LED CCTV MONITOR ULE-217 Model Please read this manual thoroughly before use, and keep it handy for future reference.
- Page 3 SAFETY INSTRUCTION ………………………………………………………….…… 2 ~ 3 CAUTIONS ……………………………………………………………......FCC RF INTERFERENCE STATEMENT ……………………………....... INSTALLATION ………………………………………………………………………….. CONNECTING WITH EXTERNAL EQUIPMENT …………………………………… REMOTE FUNCTIONS ………………………………………………………………… CONTROLS AND FUNCTIONS ……………………………………………………….. 9 ~ 16 MOUNTING GUIDE …………………………………………………………………….. D-SUB CONNECTOR PIN ASSIGNMENTS ………………………………………… POWER MANAGEMENT ……………………………………………………………… SPECIFICATION ………………..………………………………………………………...
-
Page 4: Important Safety Instruction
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. - Page 5 - The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. 14 Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.”...
- Page 6 CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à...
-
Page 7: Doc Compliance Notice
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 8: Positioning Your Display
Before setting up the monitor, ensure that the power to the monitor and other attached devices are turned off. ※ Notice: Stand & Screws are optional A. Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. -
Page 9: Rear Connection
Rear Connection 1. SDI OUT 2. SDI IN 3. AV2 IN 4. AV1 OUT 5. AV1 IN 6. TRIGGER IN 7 & 8. AUDIO R&L (AV1 & AV2) 9. PC STEREO IN (VGA & DVI) 10. VGA 11. DVI 12. HDMI 13. -
Page 10: Remote Controller(Optional)
Remote Controller(Optional) 1. POWER( Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Selects an input source. 3. AUTO Auto geometry adjustment in the RGB-PC source. 4. HOLD Stops the Trigger & Auto switching functions. 5. - Page 11 Bottom Key Control 1. SOURCE/ Selects an input source. Enters a submenu or accepts your selection in the OSD menu. 2. MENU Activates or exits the OSD. Moves previous menu or status in the OSD. 3 & 4. AUTO/▼ & ▲ Moves another option in the OSD.
-
Page 12: Osd Menu Description
OSD Menu Description All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. (On Screen Display) To adjust the OSD screen: 1. Press the MENU button to enter the OSD menu. 2. Press the ▲/▼ buttons to select the desired option. The selected option is highlighted. 3. - Page 13 B. Picture/Sound Option Function Value Picture Mode Sets picture mode. See table below Color Tone Sets color tone. See table below Mute Mutes speaker sound. Off or On Volume Adjust the level of audio volume. 0 ~ 100 Size Display picture size. See table below Reduces noise of the picture.
- Page 14 Color Tone Cool Gives the white color a bluish tint. Normal Gives the white color a neutral tint. Warm Gives the white color a reddish tint. User To manually adjust the color tones(Red, Green, and Blue). Size Sets the image size to 4:3 Panorama Sets the image to panorama Zoom1...
- Page 15 C. PIP Option Function Value Activates the PIP feature. Off or On Input Source Selects the input source for the PIP area. See table below Enables 3 screen size.4:3 side by corner, 4:3 side by 4: 3, PIP Mode PIP, PBP1 or PBP2 and full screen side by side.
- Page 16 D. Setup Option Function Value Resets the monitor settings to the factory Reset default. English, French, Deutsch, Language Sets the language of the OSD menu. Italian, Spanish, Portuguese or Nederland Changes background of monitor menus. OSD Tone Transparency or On (e.g.
- Page 17 Trigger Option Function Value Trigger Enable Activates the trigger feature. Off or On AV1, AV2, RGB-PC, Trigger Input Selects the input source for the Trigger. DVI, HDMI or HD-SDI Buzzer Inactivated. Selects the amount of time, in seconds, Trigger Time 3 ~ 100 that the monitor displays the trigger Input image.
- Page 18 N/C(Normally Closed): The Trigger function is activated when the trigger cable is opened. N/O(Normally Opened): The Trigger function is activated when the trigger cable is closed. High: The Trigger function is activated when the trigger signal is DC 2~5[V]. Low: The Trigger function is activated when the trigger signal is DC 0~0.6[V].
- Page 19 Wall mounting (Optional) The LCD monitor is suitable for wall mounting by using the VESA 100 standard wall mount (not included in the delivery). M4x10 screws ※ Attention! You must use four M4x10 screws to assemble this monitor and the wall mount bracket. ※...
-
Page 20: Pin Assignments
▶ Pin Assignments Pin 1 RED VIDEO GREEN VIDEO SIGNAL CABLE DETECT BLUE VIDEO GROUND GROUND SDA(for DDC) GROUND H-SYNC.(or H+V SYNC.) RED GROUND V-SYNC. GREEN GROUND SCL(for DDC) BLUE GROUND D-SUB Accessories ▶ 1. Power cord. 2. Power adaptor 3. - Page 21 Power Consumption Mode Power Consumption < 21.6W Turned On Turned Off < 1W LED Indicator The power management feature of the monitor is comprised of two stages: Turned on(blue) and turned off(red). Mode Monitor Operation Blue Normal Operation Turned On Turned Off Not Operation - 19 -...
-
Page 22: Input Signal
21.5” 21.5˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm): 0.24825(H) x 0.24825(V) ² Brightness: 250cd/m (Typical) LCD-Type Contrast ratio: 1000:1 (Typical) Viewing angle: 170°/160°(H/V) Response time: 5ms (Typ., on/off) 1920X1080@60Hz RESOLUTION (H x V) Horizontal: 31~80kHz, FREQUENCY Vertical: 56~75Hz VIDEO (2ch input 1.0Vp-p, 75Ω terminated, 1ch loop-through out) HDMI (High Definition Multimedia Interface) DVI (Digital Video Interface) INPUT SIGNAL... - Page 23 (Unit: mm) - 21 -...
-
Page 24: Weee Symbols
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. - Page 25 MEMO...
- Page 26 MEMO...
- Page 28 Property of L39ME0333 Rev.0...