Sony PEGA-CC5 Operating Instructions (primary manual) Operating Instructions Manual page 17

8
Click Done.
Installation of the Car Cradle basic software on your computer is
completed.
The Information dialog box is displayed.
9
Click OK.
10
Click Finish.
Tip
If you want to install sample pictures, follow the procedure in "Installing sample
pictures" (page 17).
11
To install the Car Cradle basic software on your CLIÉ
handheld, press the HotSync
®
The HotSync
your CLIÉ handheld.
b
For details about the HotSync
CLIÉ handheld.
12
After HotSync
Launcher screen on your CLIÉ handheld then tap the Car
Installer icon.
The information screen is displayed. Tap Reset.
After resetting, the Car Installer icon disappears, the Car Setting icon
appears.
Installation of the Car Cradle basic software on your CLIÉ
handheld is completed.
b
For details about additional installation, refer to the manuals supplied with your CLIÉ
handheld.
Note
After performing a hard reset on your CLIÉ handheld, you need to reinstall the Car
Cradle basic software.
Installing sample pictures
You can install sample pictures stored on the Installation CD-ROM for the
Photo, Screensaver and Music applications.
1
Click the Picture button after performing steps 1 and 2 on
page 16.
operation starts and the selected software is downloaded to
®
operation, refer to the manuals supplied with your
®
operation is completed, display the CLIE
®
button on the cradle.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •
17