Using The Built-In Fm Transmitter - Sony PEGA-CC5 Operating Instructions (primary manual) Operating Instructions Manual

Tips
• Background play is always enabled during in-vehicle mode. Playback continues if
another application is selected.
• If background play is enabled, playback continues when your CLIÉ handheld enters
in-vehicle mode. (Enable background play from Preferences of Audio Player in
normal CLIÉ mode.)
• The system sound depends on the Music setting. Only when the System Sound
(page 62) is enabled, the system sound of Music will be heard. To adjust the volume
level of the system sound, refer to page 62.
• A-B repeat function is not available in-vehicle mode. When your CLIÉ handheld
returns to normal CLIÉ mode, A-B repeat function is reinstated.

Using the built-in FM transmitter

• The built-in FM transmitter of the car cradle modulates the audio signal into
an RF (Radio Frequency) signal so it can be received by the FM tuner of your
car audio. You can enjoy music in your CLIÉ handheld with your car audio
even if it does not have input terminals for other devices, or if the SONY-
BUS connection adapter (optional) is not connected.
• If interference noise occurs during audio playback, change the frequency of
the transmitter.
1
Enable and set the FM Transmitter in the Sound
configuration of Car Setting (page 62).
2
Mount your CLIÉ handheld in the car cradle.
3
Select Tuner as the source on the car audio.
4
Tune the frequency of the car audio to that which you set
in Car Setting.
5
Tap the Music icon on the Car Launcher screen.
The Music screen is displayed.
6
Tap N/x on the Music screen.
Music from your CLIÉ handheld is heard through the car audio speakers.
To adjust the volume
Use the volume control of the car audio to adjust the volume level.
Note
Music data information is not displayed on the car audio display.
46