Download Print this page

Advertisement

Car Cradle

Operating Instructions

Owner's Record
The model number and serial number are located on the back of the product. Record the model
number and the serial number in the space provided below. Refer to them whenever you call
upon your Sony dealer regarding this product.
Model No. PEGA-CC5 Serial No.
For installation and connections, see the supplied installation/connections manual.
For details about the StreetFinder
®
3
StreetFinder
C
Travel Navigation Software User's Guide.
PEGA-CC5
© 2003 Sony Corporation
®
3
C
Travel Navigation Software, see the supplied
3-256-433-11 (2)

Advertisement

   Also See for Sony PEGA-CC5 Operating Instructions (primary manual)

   Related Manuals for Sony PEGA-CC5 Operating Instructions (primary manual)

   Summary of Contents for Sony PEGA-CC5 Operating Instructions (primary manual)

  • Page 1: Car Cradle

    The model number and serial number are located on the back of the product. Record the model number and the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. PEGA-CC5 Serial No.

  • Page 2: Table Of Contents

    WARNING CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including...

  • Page 3

    Music ..... .45 Using the built-in FM transmitter . . . 46 Using the SONY-BUS connection adapter (optional)....47 Using a cassette adapter (optional) .

  • Page 4

    CLIÉ handheld. For details about computer operation, refer to the manual for the computer. No guarantee for lost data or damaged data Sony does not provide any guarantee for lost or damaged data. ® operating system. For details about CLIÉ handheld,...

  • Page 5

    WARNING To avoid the risk of injury or accident, read the following warning before installing and operating the unit. On safety • Comply with your local traffic laws and regulations. • For your safety, do not operate equipment, mount or remove your CLIÉ handheld from the car cradle while driving.

  • Page 6

    About GPS GPS (Global Positioning System) satellites continuously emit signals for positioning on the Earth. As a GPS antenna receives these signals, users can be informed of their location (latitude, longitude and altitude) anywhere on the Earth. Information must be received from three satellites in order to obtain two-dimensional fixes (altitude and longitude), and four satellites are required for...

  • Page 7: Before Use

    • In no event will SONY be liable for any financial damage or loss of profits, including claims made by third parties, arising out of the use of the software supplied with this product.

  • Page 8: What You Can Do With CliÉ™ Handheld During In-vehicle Mode

    What you can do with CLIÉ™ handheld during in-vehicle mode Introducing applications Car Launcher This application uses large icons to allow you to finger tap the screen (without using the stylus) for quick access to desired applications. During in-vehicle mode, tapping/ pressing the Home button (short screen) or the Home icon (long screen) returns you to the Car Launcher...

  • Page 9

    Today When you place your CLIÉ handheld in the car cradle for the first time that morning and again that afternoon, the Today application activates automatically and reads out today’s date, your current/next schedule and number of unread mails. Music This application allows you to play music data, such as MP3/ATRAC3 files.

  • Page 10: Gps Meter

    GPS Meter This application allows you to view GPS signal reception conditions. Monitor This application displays the playing/receiving information of a Sony car audio when connected to the optional SONY- BUS connection adapter (XA-CC1).

  • Page 11: Location Of Controls

    Location of controls Front panel A Auto dimmer eye Receptor for the dimmer. B Built-in speaker for the Text- to-voice function (located at the back of the car cradle) • While your CLIÉ™ handheld is mounted in the car cradle, the speaker of your CLIÉ...

  • Page 12: Side Panel

    Side panel A VOL +/– buttons for the built-in speaker • These buttons control only the built-in speaker of the car cradle. • The volume indicator appears only while you adjust the volume level. Shortly after you finished adjusting the volume, the volume indicator disappears.

  • Page 13: Wireless Card Remote Commander

    Wireless card remote commander Refer to the pages listed for details. For details about the StreetFinder Guide. For details about replacing the batteries, refer to “Replacing the lithium battery” on page 76. A VOL +/– buttons for the built- in speaker •...

  • Page 14: Home Button

    D < (./m)/, (M/>) buttons Press to: – move the cursor left/right on the Car Launcher screen. 31 – go to the previous/next track. 50 – go to the previous/next mail/ schedule. 36, 42 – move the map left/right, back/ forward on the text instruction screen (StreetFinder application).

  • Page 15: Getting Started

    Getting started Initial setup of your CLIÉ™ handheld Follow the procedure below prior to using your CLIÉ handheld with the car cradle. Step 1: Installing software for the car cradle Step 2: Setting up your CLIÉ™ handheld for the car cradle Step 3: Mounting your CLIÉ™...

  • Page 16

    Select the feature you want to install on your CLIÉ handheld with the car cradle. Basic Applications: The basic applications for the car cradle. Audio Monitor: The application for a Sony car audio via the SONY-BUS connection adapter (optional) (page 54). Click Next.

  • Page 17

    Click Done. Installation of the Car Cradle basic software on your computer is completed. The Information dialog box is displayed. Click OK. Click Finish. If you want to install sample pictures, follow the procedure in “Installing sample pictures” (page 17). To install the Car Cradle basic software on your CLIÉ...

  • Page 18

    Click the INSTALL button. The setup program starts and the InstallShield Wizard window is displayed. Click Next. Select Long Screen Type or Short Screen Type of your CLIÉ handheld. Click Next. Select Nature/Sports/Others. Click Next. The Start Copying Files is displayed. Confirm the settings.

  • Page 19: Setting Up Your CliÉ™ Handheld For The Car Cradle

    Step 2: Setting up your CLIÉ™ handheld for the car cradle Follow the setup procedure according to your CLIÉ handheld type. Removing the protection cover (short screen type) Before mounting and using your CLIÉ handheld in the car cradle, you need to remove the protection cover.

  • Page 20: Mounting Your CliÉ™ Handheld In The Car Cradle

    Step 3: Mounting your CLIÉ™ handheld in the car cradle To operate applications/functions during in-vehicle mode, mount your CLIÉ handheld in the car cradle. Notes • Do not mount or remove your CLIÉ handheld while driving. • When you operate Car Setting, detach your CLIÉ handheld from the car cradle. During in-vehicle mode, Car Setting is not displayed.

  • Page 21

    Tilt back your CLIÉ handheld to rest in the car cradle. Note Do not mount your CLIÉ handheld on the connector of the car cradle vertically. Detaching your CLIÉ handheld from the car cradle/ turning off the car cradle The car cradle turns on when your CLIÉ handheld is mounted in the car cradle. When the car cradle is not in use, detach your CLIÉ...

  • Page 22: Charging Your CliÉ Handheld

    Notes • If battery power is not turned off when the ignition key is in the OFF position, detach your CLIÉ handheld from the car cradle as battery drain may result. • Do not detach your CLIÉ handheld from the car cradle with one hand. It may cause a malfunction.

  • Page 23: Various In-vehicle Mode Systems/functions

    Various in-vehicle mode systems/functions For your safety, when your CLIÉ™ handheld enters in-vehicle mode, a Warning message is displayed. To cancel the Warning message, tap the screen or press any button on the wireless card remote commander. During in-vehicle mode, the car cradle system restricts certain applications/ functions on your CLIÉ...

  • Page 24

    Normal CLIÉ mode b In-vehicle mode When your CLIÉ handheld is mounted in the car cradle, it enters in-vehicle mode. If the car cradle is off, the CLIÉ handheld remains in normal CLIÉ mode. If the current application is not compatible with in-vehicle mode. Applications incompatible with in-vehicle mode.

  • Page 25

    In-vehicle mode b Normal CLIÉ mode • When your CLIÉ handheld is detached from the car cradle, the CLIÉ handheld enters the normal CLIÉ mode. • If the car cradle is turned off while your CLIÉ handheld is mounted in it, the CLIÉ...

  • Page 26: About Sleep Mode

    – The screen is turned off after the Warning message is displayed and touch panel/button operation is not available. – The wireless card remote commander of the car cradle is available. – Car audio operation is available only when the SONY-BUS connection adapter is connected. – The caution alarm is available.

  • Page 27: About The Caution Alarm

    About the caution alarm The caution alarm alerts you to not to leave your CLIÉ handheld in the car. After 5 seconds the car cradle is turned off during in-vehicle mode, the caution alarm sounds and the screen flashes. To stop the caution alarm, do any of the following –...

  • Page 28: Basic Operations

    Basic operations Operating the touch panel During in-vehicle mode, it is recommended to tap the screen with your finger. Notes • Do not tap with excessive force. • Be careful not to lose or damage the stylus if you use it in the car. Using Car Launcher Car Launcher shows applications only for in-vehicle mode.

  • Page 29: Display Items

    Display items Short screen type A Application icons Tap any icon to start an application. B Arrow icons Tap to display either the previous/ next page. Available only when previous/next page exists. C Color mode switch Tap to change day/night mode. For details, refer to “Setting color changing”...

  • Page 30: About Screensaver

    Notes • Depending on the screen type of your CLIÉ handheld, the Car Launcher screen items are different. 4 is only for the long screen type of your CLIÉ handheld. If your CLIÉ handheld is the short screen type, 4 is not displayed. •...

  • Page 31: Using Applications

    Using applications Before using your CLIÉ™ handheld with the car cradle, you have to install software for the car cradle on your CLIÉ handheld. Install the Car Cradle basic software from the supplied Installation CD-ROM. When you use the StreetFinder Travel Navigation Software, too.

  • Page 32

    This application displays images on your CLIÉ handheld/“Memory Stick” media. This application allows you to view GPS signal reception conditions. This application allows you to view you the Sony car audio information on the CLIÉ handheld screen. ® operation...

  • Page 33: Mail (text-to-voice Application)

    Mail (Text-to-voice application) The Mail application reads out the mail stored in the CLIE Mail™ application. The body of mail text is not displayed. The Mail application restricts certain functions on the CLIE Mail application. For details about the CLIE Mail application, refer to the manuals supplied with your CLIÉ™...

  • Page 34: Display Items

    Display items Notes • If a name consists of many characters, the end is displayed as “…” • If there is no mail in the current folder, “NO MAIL” is displayed. Only the folder switch icon for the Mail application is available. A Folder name Displays the folder name.

  • Page 35

    G ./> icons For details, page 36. refer to You cannot go to the previous/next mail from the first/last one. icon To start/stop reading out the mail. I Folder switch icon When the folder switches, current read out stops and then the folder name and the number of unread mails is read out and the unread mail is displayed.

  • Page 36: About Filtering

    G ./> icons Go to the beginning of the current mail Go to the beginning of the previous mail Go to the previous mail Go to the beginning of the next mail Go to the beginning of a following mail Go backwards Go forwards About filtering...

  • Page 37

    Symbol Symbols are special characters in your mail (such as “&,” “ *,” “ _,” etc.). Only blocks of contiguous symbols containing fewer symbols than the number set in the Symbol filter (page 71) will be read out. Example: If you select “4 or more” on the Use Symbol filter setting page 71 Symbols less than 4 are read out.

  • Page 38: (text-to-voice Application)

    Schedule (Text-to-voice application) The Schedule application reads out the schedules/events stored in the Date Book application on your CLIÉ™ handheld. For details about Date Book, refer to the manuals supplied with your CLIÉ handheld. Notes • You cannot edit the schedule/event. •...

  • Page 39

    Start time reading out mode The schedule starts to read out automatically when the start time of the schedule is reached. Tips • This mode starts automatically even if Schedule is not activated. • An event is read out only during Normal reading out mode. Alarm reading out mode The schedule starts to read out automatically when the alarm time is reached.

  • Page 40: Display Items

    Display items Note If a name consists of many characters, the end is displayed as “…” A Date of the schedule/event Displays the date of a schedule/event by month/day/day of the week. If the date is current day, the C icon is not available.

  • Page 41

    F ./> icons For details, refer to page 42. Tips • The schedule/event cannot go to the previous one: – If the current schedule/event is the first one of today. – If the current schedule/event is in progress. • The schedule/event proceeds into the next day.

  • Page 42

    F ./> icons Go to the beginning of the current schedule/event Go to the beginning of the previous schedule/event Go to the previous schedule/ event Go to the beginning of the next schedule/event Go to the beginning of a following schedule/event Go backwards Go forwards Tap ..

  • Page 43: Today (text-to-voice Application)

    Today (Text-to-voice application) When your CLIÉ™ handheld enters in-vehicle mode for the first time in the morning or afternoon of the day, Today activates automatically and starts to read out today’s date, current/next schedule and number of unread mails. After reading out, Car Launcher or the previous application is displayed automatically.

  • Page 44

    Tips • You can activate the Schedule or Mail application by tapping on the screen area of each application on the Today screen. • If Today is assigned to any of the S1 to S6 buttons (page 64) and you press the button, Today is activated.

  • Page 45: Music

    FM transmitter, you can listen to music in your CLIÉ handheld via the car audio speakers. • Connecting the car cradle to a Sony car audio via the SONY-BUS connection adapter (optional) (page 47) • Using a cassette adapter (optional) (page 48) –...

  • Page 46: Using The Built-in Fm Transmitter

    RF (Radio Frequency) signal so it can be received by the FM tuner of your car audio. You can enjoy music in your CLIÉ handheld with your car audio even if it does not have input terminals for other devices, or if the SONY- BUS connection adapter (optional) is not connected.

  • Page 47: Using The Sony-bus Connection Adapter (optional)

    Using the SONY-BUS connection adapter (optional) You can operate the Music application with a Sony car audio by connecting the SONY-BUS connection adapter. The track number and elapsed playing time is displayed on the Sony car audio display. For details about the SONY-BUS connection adapter, refer to the manual supplied with the SONY-BUS connection adapter.

  • Page 48: Using A Cassette Adapter (optional)

    Notes • When playback stops, the clock (OFF) display appears on the Sony car audio display. • The Music screen switches to the Monitor screen depending on the setting (page 73). • LINE OUT is turned off and the built-in FM transmitter is deactivated when the SONY-BUS connection adapter is connected.

  • Page 49: Display Items

    Display items Notes • “No Music Data” indicates there is no music data in the “Memory Stick” media inserted in your CLIÉ handheld. • “No Memory Stick” indicates there are no “Memory Stick” media and no music data in your CLIÉ handheld.

  • Page 50

    • To switch the effect pattern on the Effect screen. E REPEAT icon To switch REP OFF*/REP ALL/ REP 1. * If you connect the SONY-BUS connection adapter, REP-OFF is not available. Notes • The repeat mode selected during in- vehicle mode is returned to the normal CLIÉ...

  • Page 51: Streetfinder ® C 3 Travel Navigation Software

    ® StreetFinder This application allows you to view maps on your CLIÉ handheld. By using the built-in GPS function of the car cradle, your current location can be monitored on-screen. If the route* has been downloaded to your CLIÉ handheld or “Memory Stick”...

  • Page 52: Photo

    Photo The Photo application displays the images on your CLIÉ™ handheld/ “Memory Stick” media. • All images on your CLIÉ handheld and “Memory Stick” media are displayed. • Images edited by your CLIÉ handheld can be displayed. For details about organizing images, refer to the manuals supplied with your CLIÉ handheld.

  • Page 53: Gps Meter

    GPS Meter This application allows you to view GPS signal reception conditions. To start the GPS Meter application Tap the GPS Meter icon on the Car Launcher screen. The GPS Meter screen is displayed. To exit the GPS Meter screen. Press the Home the Home icon (long screen type) or press HOME on the wireless card remote commander.

  • Page 54: Monitor

    Monitor The Monitor application shows you playing/receiving information (title list of the disc in the CD/MD changer, title list of the FM station memo) on a Sony car audio. Displaying the playing/receiving information on the Sony car audio on the screen of your CLIÉ™...

  • Page 55: Display Items

    Display items You can switch the Standard and List screen on the Monitor screen by using the Standard/List switch icon. For details about display items, refer to the manual supplied with the Sony car audio. CD/MD Standard screen Standard/List switch icon*...

  • Page 56

    *6 Available only when an MP3 file is played or CD TEXT disc contains displayable information. *7 If the disc has been labeled by the Sony car audio using the CUSTOM FILE function, Disc Memo is displayed accordingly. *8 Only for CD TEXT discs with the artist name.

  • Page 57: List Screen

    “PUSH LIST BUTTON ON HEAD UNIT” is displayed. In this case, press the LIST button of the car audio (depending on the Sony car audio, the List screen may not display when you press the LIST button on the Sony car audio).

  • Page 58

    Others • When the Clock (OFF) display is displayed on the Sony car audio, the current date and the clock is displayed on the Monitor screen. The time is controlled by the CLIÉ handheld. Indicated time may differ from that of the Sony car audio.

  • Page 59: Other Functions

    Other functions Car Setting Car Setting enables you to customize the setting options on your CLIÉ™ handheld for in-vehicle mode. Displaying the Car Setting screen for each menu Notes • When you operate Car Setting, detach your CLIÉ handheld from the car cradle. During in-vehicle mode, Car Setting is not displayed.

  • Page 60

    Uninstalls the Car Cradle basic software and Audio Monitor software on your CLIÉ handheld. Configures the settings for the Sound function. (System Sound/Lower audio volume during voice playback/FM Transmitter/Delay time to Sony Car Audio) Customizes the display order for Car Launcher. Customizes applications assigned to application buttons on the wireless card remote commander.

  • Page 61: Uninstalling The Car Cradle Basic Software On Your CliÉ Handheld

    Uninstalling the Car Cradle basic software on your CLIÉ handheld If you uninstall, you will not be able to use any applications/functions for the car cradle. When you mount your CLIÉ handheld in the car cradle after uninstallation, your CLIÉ handheld remains in normal CLIÉ mode. Tap the arrow V in the top right-hand corner of the Car Setting screen and select Uninstall.

  • Page 62: Setting Sounds

    Setting Sounds You can configure various sound settings. Displaying the Sound screen Tap the arrow V in the top right-hand corner of the Car Setting screen and select Sound. The Sound setting screen is displayed. Setting the System Sound You can adjust the volume level of the system sounds. Tap the arrow V next to System Sound and select the desired volume level or Off.

  • Page 63: Setting The Display Order

    Setting the Delay time to Sony Car Audio You can set playback start time to provide time for the Sony car audio to recognize your CLIÉ handheld. This setting prevents the beginning of a track being cut off. Tap the arrow V next to Delay time to Sony Car Audio and select the desired delay time.

  • Page 64: Assigning Applications To Application

    Assigning Applications to Application Buttons You can assign your favorite applications to the application buttons (S1 to S6) on the wireless card remote commander for quick access to them and display them on the Car Launcher screen. • The default setting is: S1 = Today The others = appear in alphabetical order.

  • Page 65: Setting Screensaver

    Setting Screensaver Tap the arrow V in the top right-hand corner of the Car Setting screen and select Screensaver. The Screensaver setting screen is displayed. Tap the Enable screen saver check box. Tips • When the check box is cleared, the items shown below Enable screen saver do not appear.

  • Page 66

    Tap the box next to Images and select images. The Select images screen is displayed. If there are no images, “No data to select” is displayed. Store images in your CLIÉ handheld or a “Memory Stick” media. 1 Tap the check box to select images. Unselect: To cancel the selection of all images.

  • Page 67: Setting Miscellaneous

    Setting Miscellaneous Displaying the Miscellaneous screen Tap the arrow V in the top right-hand corner of the Car Setting screen and select Miscellaneous. The Miscellaneous setting screen is displayed. Setting attach/detach alert You can select whether or not to enable the alert when your CLIÉ handheld changes between in-vehicle mode and normal CLIÉ...

  • Page 68

    Tap the Enable color changing check box. When the check box is checked, the color changes automatically at the specified time set by you. Tips • When the check box is cleared, the items in the following steps do not appear. •...

  • Page 69: Setting The Voice Pitch, Speed And Animation For Reading Out (text-to-voice Function)

    Setting the voice pitch, speed and animation for reading out (Text-to-voice function) You can set the voice pitch, speed and animation of reading out (Text-to-voice function). This setting applies to all Text-to-voice applications. Tap the arrow V in the top right-hand corner of the Car Setting screen and select Voice Parameters.

  • Page 70: Configuring The Mail Settings

    Configuring the Mail settings You can configure the settings for the Mail application. Tap the arrow V in the top right-hand corner of the Car Setting screen and select Mail. The Mail setting screen is displayed. Tap the check box next to each option to select it. Refer to the explanation below for details about each option.

  • Page 71

    Filter settings • Use Content filter: • Use Signature filter: • Use Symbol filter: Configuring Signature filter setting If no mail is stored, you cannot store the signature. Tap ‘Signature Manager’. The Signature Manager screen is displayed. Left list Tap Mail. The subject is displayed in the list on the left.

  • Page 72: Configuring The Music Settings

    Tap the stored signature in the list on the left to confirm The signature is displayed in the list on the right. To remove the stored signature Tap the desired signature in the list on the left and then tap Remove. To complete/exit the Signature Manager screen Tap Return.

  • Page 73: Configuring The Photo Settings

    Music application is selected. The screen does not switch to Monitor when “PDA” is selected as a source for a Sony car audio. This setting appears only when the Monitor application is installed and the SONY-BUS connection adapter is connected.

  • Page 74: Configuring The Schedule Settings

    Configuring the Schedule settings You can configure the settings for the Schedule application. Tap the arrow V in the top right-hand corner of the Car Setting screen and select Schedule. The Schedule setting screen is displayed. Tap the check box next to each option to select it. Refer to the explanation below for details about each option.

  • Page 75: Additional Information

    Additional information This section describes how to solve common problems you may encounter when using your CLIÉ™ handheld with the car cradle. Maintenance Fuse replacement If the car cradle does not function correctly when connected to the car battery adapter, make sure that the fuse in the car battery adapter has not burned out. If it has burned out, replace the fuse by the following procedures.

  • Page 76: Replacing The Lithium Battery

    Replacing the lithium battery Under normal conditions, battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the wireless card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion.

  • Page 77: Troubleshooting

    The following checklist and the manuals supplied with your CLIÉ™ handheld will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. Sony recommends that you make a note of displayed messages or alerts for future references. General My CLIÉ...

  • Page 78

    Operation The Car Installer is not performed properly. tYou cannot install the Car Cradle basic software on “Memory Stick” media. Be sure to download the Car Cradle basic software to your CLIÉ handheld by the ® operation, then perform Car Installer. HotSync I cannot operate normal CLIÉ...

  • Page 79

    FM transmitter is disabled. The LINE-OUT output does not function. When the SONY-BUS connection adapter is connected between Sony car audio and the car cradle, the LINE-OUT output does not function. Music is not being heard from the built-in speaker.

  • Page 80

    The wireless card remote commander does not function. When the battery becomes weak, the range of the wireless card remote commander becomes shorter (page 76). Buttons may not function depending on the operating situation. The dimmer does not function. tMake sure the dimmer position is AUTO (page 12). When the ignition switch is in the OFF position, an alarm sounds and the screen flashes.

  • Page 81: Specifications

    Specifications Operating temperature 5 ºC to 35 ºC (41 ºF to 95 ºF) Cradle (Body) Storage temperature – 40 ºC to 80 ºC (– 40 ºF to 170 ºF) Dimensions (W/H/D) Approx. 78.2 × 138.5 × 37.4 mm × 5 Mass Approx.

  • Page 82: Computer System Requirements

    Computer system requirements You need one of the following systems installed on your computer to be able to use the Palm™ Desktop for CLIÉ software and software supplied on the installation CD-ROM: • OS: Microsoft Windows 98 Second Edition, Windows Millennium Edition, Windows 2000 Professional, Windows XP Home Edition, Windows XP Professional...

  • Page 83: Index

    Content filter ....36 Delay time to Sony Car Audio..63 Dimmer..... . . 12 Display Order .

  • Page 84

    Touch panel ....28 Customer Support For the latest support information, check our official Sony CLIÉ Web site Customers in USA http://www.ita.sel.sony.com/support/clie/access/...

Comments to this Manuals

Symbols: 0
Latest comments: