Sony PEGA-CC5 Operating Instructions (primary manual) Operating Instructions Manual page 71

Filter settings
Configuring Signature filter setting
If no mail is stored, you cannot store the signature.
1
Tap 'Signature Manager'.
The Signature Manager screen is displayed.
Left list
2
Tap Mail.
The subject is displayed in the list on the left.
Tap Mail again. The sender is displayed in the list on the left.
3
Tap the subject/sender in the list on the left.
The body is displayed in the list on the right.
4
Tap the signature in the list on the right.
5
Tap Add to store the sentence as a signature.
The signature is displayed in the list on the left.
• Use Content filter:
Text from an original mail, such as a reply, will
also be read out. If the first character of a line
matches a character stored in the filter, a chime
sound will be heard at the beginning and end of
a reply message when the mail is read out.
Characters stored in the filter are not read out.
You can store up to 5 characters.
Tap the Use Content filter check box then
enter the desired character in each field.
• Use Signature filter:
b
For details, see below.
• Use Symbol filter:
Tap the arrow V and select the desired number.
If you want to be read the first symbol only,
check the Read first symbol only check box.
While displaying the subject/
sender, Mail switches to Mail
(Subject)/Mail (Sender).
Right list
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •
71