Electronic Function - Makita DLW140 Instruction Manual

Spark guard adjustment
Country specific
The spark guard is factory-installed with its lower edge contact-
ing the base. Operating the tool in this position will cause many
sparks to fly around. Loosen the screw and adjust the spark
guard to a position at which minimum sparks will fly around.
► 1 . Screw 2. Spark guard

Electronic function

The tools equipped with electronic function are easy to
operate because of the following feature(s).
Soft start feature
Soft start because of suppressed starting shock.
ASSEMBLY
WARNING:
Always be sure that the tool is
switched off and the battery cartridge is removed
before working on the tool. Failure to switch off and
remove the battery cartridge may result in serious
personal injury.
Opening center cap type safety
guard
Country specific
For the tools equipped with center cap type safety
guard, loosen the clamping screw first then raise the
guard.
1
► 1 . Clamping screw
Opening European type safety
guard
Country specific
For the tools equipped with European type safety guard,
loosen the clamping screw first then open the guard as
shown.
1
2
► 1 . Clamping screw
10 ENGLISH
1