Sample Screen Warnings; Unable To Find Pendant; Pendant Is Turned Off; Procedure Has Ended - Medicomp TelePatch PM750 User Manual

Have a question or need assistance?
Call ​ M edicomp​ ' s Patient Support: ​
Screen Warnings
There are a number of screen warnings that may appear on the Handset
screen. Below is a sampling of some of the most common screen
warnings.

Unable to find Pendant

At the very start of a new procedure, if the Handset IS turned on and the
Pendant is NOT turned on, the following warning or alert will be
displayed. Turn on the Pendant to proceed. While continuing a
procedure, if the Pendant is NOT turned on when the Handset IS turned
on, the following warning or alert will be displayed. Turn on the Pendant
to proceed.

Pendant is Turned Off

If the Pendant is turned off while in the middle of monitoring, the
following warning or alert will be displayed. Turn on the Pendant to
proceed.

Procedure Has Ended

When the procedure ends, an alert will be displayed. Users should
return the unit to the Medicomp address provided in the Patient Guide.
Every ​ T ele ​ P atch Kit has a postage paid return envelope. Include all
components in the zippered kit and mail from any mailbox.
• For additional troubleshooting instructions, call Medicomp's Patient Support: 877-996-5553.
Start Procedure Exceptions

Selecting a Pendant

If more than one Pendant is identified after pressing 'Start Procedure,' the patient will be
prompted to 'Select a Pendant to Use.' The instructions below provide detail steps to select a
Pendant before starting a procedure.
Select a Pendant to Use
● User chooses from the list of Pendants on the screen
● Select the Pendant with the unique serial number listed inside the well of the Pendant.
Tele ​ P atch™ ​ C ardiac Monitor PM750
USER MANUAL - UTM0000701-05E ​
69
8 77-996-5553

SAMPLE SCREEN WARNINGS

| APRIL 4, 2019