Step 6 - Procedure Set Up; Step 7 - Procedure Settings - Medicomp TelePatch PM750 User Manual

Have a question or need assistance?
Call ​ M edicomp​ ' s Patient Support: ​
8 77-996-5553

Step 6 - Procedure Set Up

After identifying Electrode Patch site, preparing the skin, applying the Electrode Patch and,
turning on the Pendant, turning on the Handset, the patient is now ready for 'Procedure Setup'
with the ​ T ele ​ P atch ​ S ystem. The steps are described below.
After following the instructions on the patient preparation screen, which may have already
been completed, the next step is to select the correct settings before starting a procedure.
Medicomp Tele ​ P atch Handset
Patient Preparation Screen
● Tap "OK"

Step 7 - Procedure Settings

After following the instructions on the patient preparation screen, the next step is to select the
correct settings before starting a procedure. Follow the instructions below on how to select the
necessary procedure settings from the ​ T ele ​ P atch ​ S ystem.
The Procedure Setup screen will display the default settings, which are:
Patient has Pacemaker = No
Protocol = Standard
Setup = Normal
Tele ​ P atch™ ​ C ardiac Monitor PM750
USER MANUAL - UTM0000701-05E ​
| APRIL 4, 2019
39