Fitting And Removal Of Base : Prolite E2283Hs - Iiyama ProLite B2283HS User Manual

FITTING AND REMOVAL OF BASE : ProLite E2283HS

 Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Installation>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor fl at on a table with front face down.
Hold the monitor and install the Stand to the monitor
until it clicks and is secure.
Hold the monitor and install the Stand-Base to the stand
until it clicks and is secure.
<Removal>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor fl at on a table with front face down.
Press and hold the hooks inside, and pull the Stand-
Base.
Press the stopper at the top of the stand and pull it to
remove the stand from the monitor.
8 BEFORE YOU OPERATE THE MONITOR
Stopper
Stand
Stand-Base
Hook