Download Print this page
Makita 9564HR Technical Information
Makita 9564HR Technical Information

Makita 9564HR Technical Information

115mm/125mm, 4-1/2"/5"
Hide thumbs Also See for 9564HR:

Advertisement

Quick Links

T
ECHNICAL INFORMATION
Model No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Models 9564HR and 9565HR have been developed as successor
models of 9564H and 9565H with soft start and anti-restart function.
Their main features are:
・Soft start: minimizes start-up shock, and makes the tool start smoothly.
・Anti-restart function: prevents accidental start-up even if the tool is
plugged to power source.
・SJS (Super Joint System): Lock spring positioned at the junction
 between spiral bevel gear and armature shaft serves as a shock absorber.
・O ring for leakproof of grease
・Tool-less wheel cover: adjustable to any desired position
・Easy-to-grip shape
・Cord guard with higher flexibility
S
pecification
Voltage (V)
110
220
230
240
Specificatiion
Diameter
Wheel size:
Hole diameter
mm (")
Max thickness
No load speed:
min
¹
ˉ
=
Super Joint System (SJS)
Constant speed control
Soft start
Electronic current limiter
Anti-restart function
Variable speed control by dial
Protection against electric shock
Power supply cord: m (ft)
Weight according to
EPTA-Procedure 01/2003*: kg (lbs)
* With Side grip
S
tandard equipment
Depressed center wheel
Lock nut wrench
Side grip
Note: The standard equipment may vary by country or model variation.
O
ptional accessories
Depressed center wheel
Rubber pad
Dust collecting wheel cover
Abrasive disc
Wire cup brush
9564HR / 9565HR
Angle Grinder 115mm (4-1/2") /
Angle Grinder 125mm (5")
Current (A)
Cycle (Hz)
10.5
50/60
5.3
50/60
5.0
50/60
4.8
50/60
Model
9564HR
115 (4-1/2)
rpm
Wheel cover for wire cup brush
Wire bevel brush
Wheel cover for wire bevel brush
Abrasive cut off wheel
Wheel cover set
H
W
Continuous Rating (W)
Input
1,100
1,100
1,100
1,100
9565HR
125 (5)
22.23 (7/8)
6.4 (1/4)
12,000
Yes
No
Yes
No
Yes
No
Grounding
2.5 (8.2)
2.3 (5.1)
Inner flange
Lock nut
Super flange
Sanding lock nut
Head cover
OFFICIAL USE
for ASC & Sales Shop
PRODUCT
L
Dimensions: mm (")
9564HR
Model
Length (L)
299 (11-3/4)
Width (W)
130 (5-1/8)
140 (5-1/2)
Height (H)
111 (4-3/8)
Max Output (W)
Output
700
1,300
700
1,300
700
1,300
700
1,300
Dust collecting wheel guard
Elbow joint Ass'y
Joint
Dust cover attachment set
P 1/ 14
9565HR

Advertisement

loading

Summary of Contents for Makita 9564HR

  • Page 1 Description Angle Grinder 125mm (5") ONCEPT AND MAIN APPLICATIONS Models 9564HR and 9565HR have been developed as successor models of 9564H and 9565H with soft start and anti-restart function. Their main features are: ・Soft start: minimizes start-up shock, and makes the tool start smoothly.
  • Page 2: Necessary Repairing Tools

    Gear housing when removing Shoulder pin 7 [2] LUBRICATION Apply Makita grease R. No.00 to the portions designated with the black triangle, and Disulfide molybdenum to the portions designated with the gray triangle, protect parts and product from unusual abrasion.
  • Page 3 P 3/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-1. Armature, Ball bearings 6001LLB/627DDW, Spiral bevel gear 11 DISASSEMBLING (1) Disconnect Carbon brushes from Commutator as drawn in Fig. 2. Fig. 2 Shift Spiral spring from Pull up Carbon brush from Brush Remove Rear cover by unscrewing Carbon brush top and hook it holder in a half way to detach from 4x18 Tapping screw.
  • Page 4 P 4/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-1. Armature, Ball bearings 6001LLB/627DDW, Spiral bevel gear 11 (cont.) DISASSEMBLING (3) Remove Gear housing cover from Armature as drawn in Fig. 4. Fig. 4 1. Remove Retaining ring S-12 with 1R291. 2. Remove Armature and Flat washer 12 from Gear housing cover with 1R045.
  • Page 5 P 5/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-1. Armature, Ball bearings 6001LLB/627DDW, Spiral bevel gear 11 (cont.) ASSEMBLING (1) Assemble Armature to Gear housing cover as drawn in Fig. 5. Fig. 5 1. Put Gear housing cover on U shaped portion of 2.
  • Page 6 P 6/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-1. Armature, Ball bearings 6001LLB/627DDW, Spiral bevel gear 11 (cont.) ASSEMBLING (2) Assemble Gear housing cover and Armature to Motor housing, and assemble Gear housing section to Motor housing as drawn in Fig. 6. Fig.
  • Page 7 P 7/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-2. Spiral bevel gear 38, Ball bearing 6201DDW DISASSEMBLING Note: Bearing box section can be separated from Gear housing without disassembling Motor section. (1) Disassemble Bearing box section as drawn in Fig. 7. Fig. 7 1.
  • Page 8 P 8/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-2. Spiral bevel gear 38, Ball bearing 6201DDW (cont.) ASSEMBLING (1) Make sure that O ring 52 is mounted to Bearing box as drawn in Fig. 9. Fig. 9 Bearing box O ring 52 (2) Assemble Ball bearing 6201DDW and Bearing retainer 19-33 to Bearing box.
  • Page 9 P 9/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-3. Switch lever DISASSEMBLING (1) Separate Rear cover as per the left drawing in Fig. 2. (2) Disassemble Switch lever as drawn in Fig. 11. Fig. 11 Rib of Motor housing Switch Lever Switch Knob Switch knob 1R283 Tumbler of...
  • Page 10 P 10/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-4. Shaft lock DISASSEMBLING (1) Disconnect carbon brushes from the Commutator and then separate Rear cover from Motor housing. as drawn in Fig. 2 of page 3. (2) Remove Gear housing and Bearing box from Motor housing and disassemble Shaft lock as drawn in Fig. 13. Fig.
  • Page 11 P 11/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-4. Shaft lock (cont.) ASSEMBLING (1) Be sure to use a new Pin cap for replacement and to remove all the plastic dust on Shoulder pin 7. (Fig. 15) Fig.15 Plastic dust Shoulder Pin 7 O Ring 6 (2) Assemble the Parts for Shaft lock mechanism as drawn in Fig.
  • Page 12: Circuit Diagram

    P 12/ 14 ircuit diagram Fig. D-1 Color index of lead wires' sheath Black White Blue lead wire is used for some countries instead of white. Power M3.5 Insulated terminal L shape receptacle #110. t=0.8 supply cord Straight receptacle #110. t=0.8 Switch block Noise Brush holder...
  • Page 13 P 13/ 14 iring diagram Fig. D-2 Fix controller’s lead wires in these lead wire holders. Place the slacks of Lead wires to this place. Do not loosen Lead wires in Motor housing.
  • Page 14: Wiring Diagram

    P 14/ 14 iring diagram Fig. D-3 Place the slacks of Controller’s Put this Lead wire of Power lead wires to this place. supply cord between Rib and Cord clamp. Cord clamp Fix Lead wire of Controller in these Lead wire holders. Place the slacks of Controller’s lead wires to this place.

This manual is also suitable for:

9565hr