Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Armature, Ball bearings 6001LLB/627DDW, Spiral bevel gear 11 (cont.)
DISASSEMBLING
(3) Remove Gear housing cover from Armature as drawn in Fig. 4.
Fig. 4
1. Remove Retaining ring S-12 with 1R291.
3. Put Gear housing cover on the U shaped portion of Arbor press table so that the small hole side of Gear housing
cover faces upwards.
Then, press down Ball bearing 6001LLB with 1R027.
Small hole side of
Gear housing cover
U shaped portion of
Arbor press table
4. Remove Labyrinth rubber ring 22.
Labyrinth
rubber ring 22
Armature ass'y
1R291
Retaining ring S12
5. Remove Ball bearing 627DDW
with 1R269.
Ball bearing
627DDW
2. Remove Armature and Flat washer 12 from Gear housing cover
with 1R045.
1R045
Gear housing
cover
Ball bearing
6001LLB
1R027
Gear housing
cover
Flat washer 12
Ball bearing
6001LLB
Gear housing cover
with Ball bearing
6001LLB
Flat washer 12
Armature
6. Remove Insulation washer
and Flat washer 7.
Flat washer 7
Insulation
washer
P 4/ 14
Advertisement
