Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Switch lever
DISASSEMBLING
(1) Separate Rear cover as per the left drawing in Fig. 2.
(2) Disassemble Switch lever as drawn in Fig. 11.
Fig. 11
Switch knob
Tumbler of
Switch
Switch Lever
Switch
1. Insert 1R283 into the space between
Switch knob and the rib of Motor housing
to prevent Switch knob from moving,
and push Switch lever strongly toward
Switch-on position.
ASSEMBLING
Assemble Switch knob to Switch lever as drawn in Fig. 12.
Fig. 12
1. Insert Switch lever into Motor housing
until the frame of Switch lever can be
seen through Switch knob assemble hole.
And keep this position to assemble
Switch knob.
Switch
knob
Rib of Motor housing
1R283
Tumbler of
Switch
2. The linkage of Switch knob
is disconnected from
Switch lever, and therefore,
Switch knob is removed.
2. Engage Switch Knob's hook
with the framed portion of
Switch lever while seeing
through the Switch knob
assemble hole.
Switch Lever
Switch Knob
Switch Lever
Switch
3. While bending Switch lever carefully,
Switch
knob
Switch Lever
pull it out from Motor housing.
3. Release Switch lever.
So, Switch knob is assembled
to Switch lever.
P 9/ 14
Tumbler
Advertisement
