Manual Programme Preset - Sony KV-28CL11K Instruction Manual

Level 1
•
•
Picture Adjustment
•
Mode: Personal
Contrast
•
Brightness
Colour
Sharpness
•
Hue
Reset
•
OK
•
•
Set Up
•
Language/Country
Auto Tuning
Programme Sorting
•
Progamme Labels
AV Preset

Manual Programme Preset

Detail Set Up
OK
MANUAL PROGRAMME PRESET
The "Manual Programme Preset" option in the "Set Up" menu allows you to:
1) Preset channels or a video input source one by one to the programme order of your choice.
a) After selecting the "Manual Programme Preset" option, press
highlighted press
channel (for VCR, select programme number "0"). Then press
b) The following option is only available depending on the country you have selected in the
"Language/Country" menu. After selecting the System option, press
the TV broadcast system (B/G for western European countries, D/K for eastern European countries).
Then press .
c) After selecting the Channel option, press
("C" for terrestrial channels or "S" for cable channels). Next press
buttons to enter directly the channel number of the TV broadcast or the channel of the VCR signal. If you
do not know the channel number, press
channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
2) Label a channel using up to five characters. To do this: Highlighting the Programme option, then press
the PROGR +/- button to select the programme number with the channel you wish to name. When the
programme you want to name appears on the screen, select the Label option and press
press or to select a letter, number or "-" for a blank. Press
other four characters in the same way. After selecting all the characters, press OK twice to store.
3) Normally the automatic fine tuning (AFT) is operating, however you can manually fine tune the TV to
obtain a better picture reception in the case that the picture is distorted. To do this: while watching the
channel (TV Broadcast) you wish to fine tune, select the AFT option and press
press or to adjust the fine tuning between -15 and +15. Finally press OK twice to store.
4) Skip any unwanted programme numbers when they are selected with the PROGR +/- buttons. To do this:
Highlighting the Programme option, press the PROGR +/- button to select the programme number you
want to skip. When the programme you want to skip appears on the screen, select the Skip option and
press . Next press
To cancel this function afterwards, select "No" instead of "Yes" in the step above.
5) View and record correctly scrambled channels when using a decoder connected directly to the Scart
2/ or through a VCR. This option is only available depending on the country you have selected
S
in the "Language/Country" menu. To do this: select the Decoder option and press
press or to select On. Finally press OK twice to confirm and store.
To cancel this function afterwards, select "Off" instead of "On" in the step above.
14
Menu System
Level 2
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
. Press or to select on which programme number you want to preset the
or to select Yes. Finally press OK twice to confirm and store.
Level 3 / Function
OK
then with Programme option
.
. Then press or
or to search for it. When you have tuned the desired
. Then press or
to select the channel tuning
. After that, press the number
. Next
to confirm this character. Select the
. Next
. Next
to select