Sony KV-28CL11K Instruction Manual page 9

5
The Auto Tuning menu appears on the screen. Press the OK
button to select Yes.
6
The TV starts to automatically search and store all available
broadcast channels for you. This procedure could take some
minutes. Please be patient and do not press any buttons,
otherwise the automatic tuning will not be completed.
If no channels are found during the auto tuning process then a
new menu appears automatically on the screen asking you to
connect the aerial. Please connect the aerial (see page 7) and
press OK. The auto tuning process will start again.
7
After all available channels are captioned and stored, the
Programme Sorting menu appears automatically on the screen
enabling you to change the order in which the channels appear
on the screen.
a)
If you wish to keep the broadcast channels in the tuned order,
go to step 8.
b)
If you wish to store the channels in a different order:
i) Press the or button to select the programme number
with the channel (TV Broadcast) you wish to rearrange, then
press the button.
ii) Press the or
number position for your selected channel (TV Broadcast), then
press .
iii) Repeat steps b)1 and b)2 if you wish to change the order of
the other channels.
8
Press the MENU button to remove the menu display from the
TV screen.
Your TV is now ready for use.
button to select the new programme
Do you want to start
automatic tuning?
Yes
No
OK
Auto Tuning
Programme: 01
System: B/G
Channel: C21
Searching...
No channel found
Please connect aerial
Confirm
OK
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58
Select channel:
OK
Exit:
MENU
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58 05 C27
Select new position:
OK
Exit:
MENU
First Time Operation
GB
9