Av Preset; Manual Programme Preset - Sony Esprit TAV-L1 Operating Instructions Manual

AV Preset

Do the following options.
1
Press (OK) to select [AV Preset].
2
Press M/m to select the desired input
source, then press
3
Press M/m to select the desired option
below, then press
Option Description
Label
You can conveniently assign a
name to any equipment
connected to the side and rear
sockets. The name will be
displayed briefly on the screen
when the equipment is
selected.
Press M/m to select one of
the following, then press
[AV1] (or [AV2]/[AV4])/
[VIDEO]/ [DVD]/[CABLE]/
[GAME]/[CAM]/[SAT]: Uses
one of these preset labels.
[Edit]: Creates your own label.
Follow steps 3 through 5 of
Programme Labels (page 43).
[Skip]:
Skips an input source that is
not connected to any
equipment when you press
M/m to select the input source.
After selecting this option,
press
Sound Offset Sets an independent volume
level to each equipment
connected to the system. This
setting is effective except for
the DVD function.
Press , to select [Sound
Offset], then press
Press M/m to select the desired
volume level.
44
GB
(OK).
(OK).
(OK).
(OK).
(OK).

Manual Programme Preset

(Analogue mode only)
Before selecting [Label]/[AFT]/[Audio Filter]/[Skip]/
[ATT], press PROG +/– to select the programme
number with the channel. You cannot select a
programme number that is set to skip (page 46).
1
Press (OK) to select [Manual
Programme Preset].
2
Press M/m to select one of the following
options, then press
Option Description
Programme Presets programme channels
manually.
1
2
(OK).
Press M/m to select
[Programme], then
press (OK).
Press M/m to select the
programme number
you want to manually
tune (if tuning a VCR,
select channel 0), then
press <.