OSEE HCM-700 User Manual page 51

VECTORSCOPE
5.
Set EXPOSEVECTORSCOPEENABLE item to display or hide the
vectorscope.
LOCATION
6.
There are 8 positions for display the histogram, waveform and vectorscope on
the screen, they are TOP RIGHT, MIDDLE RIGHT, BOTTOM RIGHT, MIDDLE
BOTTOM, BOTTOM LEFT, MIDDLE LEFT, TOP LEFT, and TOP MIDDLE, as
shown in Figure 5.1-15. Move them through the LOCATION item.
Figure 5.1-15 Location of the Assistant Elements
OPACITY
7.
There are 4 degrees of opacity for display the histogram, waveform and
vectorscope on the screen. Set the transparency through the OPACITY item.
 0: 100%, when opacity set to 0, the assistant element (histogram,
waveform or vectorscope) is opaque, not transparent.
 1: 75%, when opacity set to 1, the assistant element (histogram,
waveform or vectorscope) is proportional to 75% opacity.
 2: 50%, when opacity set to 2, the assistant element (histogram,
waveform or vectorscope) is proportional to 50% opacity.
Figure 5.1-14 VECTORSCOPE
45
Scenes and Tools