Table of Contents
Advertisement
Zoom 4X Editing Mode
After entering into the Zoom 4X Mode, press straight down the joystick to
move the starting position of the enlarged image.
There will be a Zoom 4X Editing icon at the bottom right of the screen, as
shown in Figure 3.4-4. The small rectangle with four direction arrows in
this icon represents the current full screen image in the monitor, you can
judge where this area is in the original image
As the same as Zoom 2X editing mode, scroll up, down, left or right the
joystick to move the displayed area to the corresponding direction, then,
press straight down the joystick to confirm and finish the movement and
exit the Zoom 4X Editing mode.
Original Image Mode
3.
Original Image Mode
In Zoom 2X mode or Zoom 4X mode, press straight down the joystick or
press BACK
The scene tools are not editable in ZOOM 2X or ZOOM 4X mode.
In ZOOM 2X mode, you need scroll the joystick 20 times from the origin
of coordinate to the maximum in horizontal direction, and you need scroll
the joystick 10 times from the origin of coordinate to the maximum in
Locations and Function of Parts and Control
Figure 3.4-3 Zoom 4X Mode
Figure 3.4-4 Zoom 4X Editing Mode
button, it will recover and display the original image.
15
Advertisement
Table of Contents
