OSEE HCM-700 User Manual page 20

Locations and Function of Parts and Control
 Zoom 2X Editing Mode
After entering into the Zoom 2X Mode, press straight down the joystick to
move the starting position of the enlarged image.
There will be a Zoom 2X Editing icon at the bottom right of the screen, as
shown in Figure 3.4-2. The small rectangle with four direction arrows in
this icon represents the current full screen image in the monitor, you can
judge where this area is in the original image.
Meanwhile, scroll up, down, left or right the joystick to move the
displayed area to the corresponding direction, then, press straight down
the joystick to confirm and finish the movement and exit the Zoom 2X
Editing mode.
ZOOM 4X
2.
 Enter Zoom 4X Mode
Scroll up the joystick to show the Zoom 2X mode, and then keep
scrolling the up the joystick to show the Zoom 4X mode, the image is
four times as large as the original one. There will be a Zoom 4X icon at
the bottom right of the screen, as shown in Figure 3.4-3:
Figure 3.4-1 Zoom 2X Mode
Figure 3.4-2 Zoom 2X Editing Mode
14