OSEE HCM-700 User Manual page 36

Monitor Settings
Figure 4.2-19 Calibration Menu
Set system CALIBRATION  DISABLE CALIBRATION item as ON, it will be
able to load LUT file.
Set system CALIBRATION  DISABLE CALIBRATION item as OFF, it will
be disable to load LUT file.
Load LUT File(1D LUT)
2.
Select system CALIBRATION  CALIBRATION LUT
/system/info/default.cl item to load a 1D LUT file from SD card.
Scroll the joystick right to display the menu, it contains two folders: SD and
internal, as shown in Figure 4.2-20. Particularly, only the SD card provides 1D
LUT file, so select the SD card, and scroll the joystick right again, it will list the
LUT files list, scroll up or down to select a LUT file, and press the joystick straight
down to confirm the selection, it will pop up a loading prompt, as shown in Figure
4.2-21:
Figure 4.2-20 Calibration LUT Directory
30