Table of Contents
Advertisement
Monitor Settings
Figure 4.2-21 Load a LUT
After loading a LUT file, it will be loaded to the output image immediately, as
shown in Figure 4.2-22:
Figure 4.2-22 Output Image Loading a LUT File
Refer to "5.1.4 Look Tools" for the details about loading the 3D LUT file.
RESET CALIBRATION LUT
3.
Select system CALIBRATION RESET CALIBRATION LUT item to restore
the default LUT file, it will prompt as shown in Figure 4.2-23:
Figure 4.2-23 Reset CALIBRATION LUT
It will revert the Gain and Offset values to default values for the current profile
selected in the LOOK PROFILE item.
31
Advertisement
Table of Contents
