Image Rotate
4.
Vertical Rotate
Set controlImage Rotate Rotate Screen item to be ON, the input image will
reverse vertically, as shown in Figure 4.2-8:
DSLR SCALE
5.
This function is designed for some DSLR cameras (CANON 5D MARK II,
CANON 7D). The valid area which will fill the screen is controlled by
controlDSLR SCALE item selection.
When the input source is coming from CANON 5D MARK II or CANON 7D DSLR
device, but the controlDSLR SCALE item is set as NONE, the DSLR SCALE
function is disable, there will be blank area at the surrounding of the image.
Otherwise, set as the corresponding DSLR model, it will enlarge and display the
image at full screen, removing those useless blank bars, as shown in Figure
4.2-9:
For different DSLR SCALE item value, the resolution comparison of the input
and output is as shown in the table below:
Figure 4.2-8 Vertical Rotate
Figure 4.2-9 DSLR SCALE
23
Monitor Settings