Cable And Antenna Only - Sony KE-37XS910, KE-42XS910 Operating Instructions Manual

Cable and Antenna
Only
Notes on Using This Connection
To Do This ...
Switch the TV's input between
the cable and antenna
Receive channels using an
antenna, instead of the cable
24
For best results, use this connection if you:
s
Have a cable and an antenna.
(This is convenient if you are using a separate rooftop antenna to receive
additional channels that are not provided by your cable company.)
s
Do not have a cable box or VCR. (If you have a cable box, see pages 25
and 27. If you have a VCR, see pages 30 and 32.)
For antenna connection, use the supplied antenna cable.
Cable Type Connect As Shown
Cable TV (CATV)
and Antenna
About Using This Connection with Dual Picture (Twin View, etc.) Features
With this connection, you cannot view antenna channels in the right dual picture
window.
When using an indoor antenna, such as rabbit-ear or dipole-
antenna, keep the antenna away from the TV. If not, noise may
appear on the screen.
Do This ...
Press ANT to switch back and forth between the TV's VHF/UHF and AUX inputs.
1
ANT
Press to switch to the AUX input.
2
Set the Cable option to Off. For details, see "Selecting Channel Options" on
page 90.
3
Run the Auto Setup program, as described in "Setting Up the Channel List" on
page 48.
(No connection to
TO COVERTER)
TO
VHF/UHF CONVERTER AUX
Antenna cable
CATV cable
(supplied)