Connecting And Setting The Tv; Basic Connections (Connecting Cable Or An Antenna); Connector Types; Connecting Directly To Cable Or An Antenna - Sony WEGA KE 42M1 Operating Instructions Manual

Sony flat panel color tv operating instructions ke-42m1
Hide thumbs Also See for WEGA KE 42M1:
Table of Contents

Advertisement

Connecting and
Setting the TV
Basic Connections
(Connecting Cable or an
Antenna)

Connector types

You may find it necessary to use some of the
following connector types during set up.
Supplied 75-ohm coaxial cable
Screw-on type
Screw into connection.
S VIDEO cable
High quality video cable for enhanced picture quality
Align guides and push into
connection.
AUDIO/VIDEO cable
Push into connection.
VIDEO - Yellow
AUDIO (Left) - White
AUDIO (Right) - Red
Some DVD players are equipped with the following
three video connectors:
Y - Green
P
(C
, C
or B-Y) - Blue
B
B
b
P
(C
, C
or R-Y) - Red
R
R
r
Push into connection.
Connecting directly to cable or an
antenna
VHF only or VHF/UHF or cable
75-ohm coaxial
cable (supplied)
Note
It is strongly recommended to connect the antenna using a 75-
ohm coaxial cable to get optimum picture quality. A 300-ohm
twin lead cable can be easily affected by radio noise and the like,
resulting in signal deterioration. If you use a 300-ohm twin lead
cable, keep it away as far as possible from the TV.

Cable box connections

Use this hookup if:
• You subscribe to a cable TV system that uses
scrambled or encoded signals requiring a cable
box to view all channels, and
• You do not intend to hook up any other audio or
video equipment to your TV.
1
Connect the coaxial connector from your cable
service to the cable box's IN jack.
2
Using the supplied 75-ohm coaxial cable,
connect the cable box's OUT jack to the TV's
VHF/UHF jack.
75-ohm coaxial
cable (supplied)
Cable
IN
OUT
jack
jack
Cable box
Also, set "Cable" to "On" in the
menu (see page 36).
Tips
• The supplied remote control can be programmed to operate
your cable box (see "Programming the Remote Control" on
page 14).
• To change channels using the cable box, set your TV to
channel 3 or 4 depending on the cable box channel output.
• If you will be controlling all channel selection through your
cable box, consider using the Channel Fix feature to set your
TV to channel 3 or 4 (see page 37).
Rear of TV
VHF/UHF jack
Rear of TV
VHF/UHF jack
(Channel)
21

Advertisement

Table of Contents
loading

Table of Contents