Table of Contents
Advertisement
II
÷
II
÷
[]
[]
[]
[]
[]
[]
Headphones
jack
Connects
to your headphones.
If your headphones
do not match the jack, use a
suitable plug adaptor (not supplied).
VIDEO
IN 1, 2 (pages 8 - 10, 13)
Connects
to the output jacks of your VCR or
other video equipment.
COMPONENT
VIDEO
IN 1 (pages
12, 14)
Connects
to the component
video (Y, P,_,P_0 and
audio (L/R) output jacks of your DVD player or
digital TV receiver.
AUDIO
OUT (page 11)
Connects
to the input jacks of your audio
equipment.
VHF/UHF
(pages 8 - 10)
Connects
to your VHF/UHF
antenna or cable.
COMPONENT VIDEO IN 2/RGB IN
(page 16)
Y/G, PdB, P_
input jacks:
Connects
to the component
video (Y/CdCR, Y/
B-Y/R-Y
or Y/PdP_)
output jacks of your DVD
player, or video output jacks of your RGB
equipment.
AUDIO
(LfR) input jacks:
Connects
to the audio output jacks of your DVD
player or RGB equipment.
HD/VD input jacks:
Connects
to the synchronized
signal output .jacks
of your RGB equipment.
[]
SUB WOOFER
(page 15)
Connects
to the input jack of your sub woofer.
[]
CONTROL
S IN/OUT
To control other Sony equipment
with the TV's
remote control,*
connect the CONTROL
S IN jack of the equipment
to the CONTROL
S
OUT jack of the TV with the CONTROL
S
cable.
To control the TV with a remote control for
another Sony equipment,
connect the CONTROL
S OUT jack of the equipment
to the CONTROL
S IN jack on the TV with the CONTROL
S
cable.
* Only when the TV is turned on, or the STANDBY/
SLEEP
indicator
lights up in red. When the TV is turned
off 0he STANDBY/SLEEP
indicator
goes oft'), you
cannot use this function.
[]
AC IN
Connects
the supplied
AC power cord.
Installing and Connecting the TV
Basic Connections
(Connecting Cable TV or
Antenna)
Connecting directly to cable or an
antenna
VHF only or VHF/UHF
or cable
75-ohm coaxial
cable (supplied)
_'_
Rear of TV
VHF/UHF
Note
It is slrongly
recommended
to connect the antenna
using a 75-
ohm coaxial
cable 1o get optimum
picture
quality.
A 300-ohm
twin lead cable can be easily affecled
by radio noise and the like,
resulting
in signal deterioration.
If you use a 300-ohm
twin lead
cable,
keep it away as far as possible
from the TV.
Cable box connections
Use this hookup if:
• Yon subscribe
to a cable TV system that uses
scrambled
or encoded
signals requiring
a cable
box to view all channels,
and
• Yon do not intend to hook up any other audio or
video equipment
to your TV.
1
Connect
the coaxial connector
from your cable
service to the cable box's IN.jack.
2
Using the supplied
75-ohm coaxial cable,
connect the cable box's OUT jack to the TV's
VHF/UHF.jack.
Cable
75-ohm coaxial
cable (supplied)
_[3:_
,_
Rear of TV
_
VHF/UHF
IN _
OUT
Cable box
Also, set "Cable"
to "On" in the _
(TV Setup)
menu (See page 18).
Tips
• Your Sony remote control can be programmed to operate your
cable box.
(See "Programming
the remote control" on page
30).
• To change channels
using
the cable
box,
set your TV to
channel 3 or 4
depending
on
the cable box channel
output.
(us)7
÷
I
I
01USO3GET+UC(_7)
p65
÷
2002622,
3:14 PM
KZ-32/42TS 1U 4-087-364-13
(1)
II
Hide quick links:
Advertisement
Table of Contents
