Satellite Receiver And Vcr - Sony KE-37XS910, KE-42XS910 Operating Instructions Manual

Satellite Receiver
and VCR
Antenna cable
(supplied)
TO
VHF/UHF CONVERTER
38
To connect a satellite receiver and VCR
1
Connect the satellite antenna cable to the satellite receiver's satellite
input jack.
2
Connect the CATV cable to the VCR's VHF/UHF input jack.
3
Use the supplied antenna cable to connect the VCR's VHF/UHF output
jack to the TV's VHF/UHF jack.
4
Use an A/V cable to connect the satellite receiver's A/V output jacks to
the VCR's A/V input jacks.
5
Use an A/V cable to connect the VCR's A/V output jacks to the TV's
A/V input jacks.
6
Run the Auto Setup program, as described in "Setting Up the Channel
List" on page 48.
Using S VIDEO jacks? See page 29.
CATV cable
VIDEO IN
Rear of TV
R -AUDIO- L
(MONO)
R -AUDIO- L
AUDIO OUT
(VAR/FIX)
AUX
Satellite receiver
A/V cable
A/V cable
DVI-HDTV IN
1
R -AUDIO- L DVI-HDTV
3
VIDEO S VIDEO
R -AUDIO- L Y P
WOOFER OUT HD/DVD IN
(VAR)
(1080i/720p/480p/480i)
Satellite
antenna
cable
VCR
6
4
5
P
B R