Table of Contents
Advertisement
Basic Connections: Connecting a Cable or Antenna
Cable or Antenna
Only
Note on Using This Connection
To Do This ...
Switch the TV's input between
the cable and antenna
26
The way in which you will connect your TV varies, depending on how your
home receives a signal (cable, cable box, antenna) and whether or not you
plan to connect a VCR.
If You Are Connecting
Cable or Antenna Only
s
No cable box or VCR
Cable Box and Cable Only
s
Cable box unscrambles only some channels
(usually premium channels)
s
No VCR
Cable Box Only
s
Cable box unscrambles all channels
s
No VCR
If you are connecting a VCR
s
See the connections described on pages 31 and 33.
For best results, use this connection if you are connecting a cable or an
antenna and you:
s
Do not need a cable box to unscramble channels. (If you have a cable
box, see page 28.)
s
Do not intend to connect a VCR. (If you have a VCR, see pages 31 and
33.)
For antenna connection, use the supplied antenna cable.
Cable Type
Connect As Shown
VHF Only or
Antenna
combined
cable
VHF/UHF
(supplied)
Cable
75-ohm
coaxial
cable
When using an indoor antenna, such as rabbit-ear or dipole-
antenna, keep the antenna away from the display unit. If not,
noise may appear on the screen.
Do This ...
ANT
Press
to switch back and forth between the TV's VHF/UHF and CABLE
inputs.
See Page
26
27
28
VHF/UHF
CABLE
Advertisement
Table of Contents
