Endress+Hauser Levelflex FMP53 Technical Information page 11

Levelflex FMP53
Endress+Hauser
Input values
Supported functions
1) in preparation
FOUNDATION Fieldbus
Manufacturer ID
Device type
Device Revision
DD Revision
CFF Revision
Device Tester Version (ITK
Version)
ITK Test Campaign Number
Link Master (LAS) capable
Link Master / Basic Device
selectable
Node address
Features supported
Virtual Communication Relationships (VCRs)
Number of VCRs
Number of Link Objects in VFD
Permanent entries
Client VCRs
Server VCRs
Source VCRs
Sink VCRs
Subscriber VCRs
Publisher VCRs
Analog Output:
• Analog value from PLC (for sensor block external pressure and temperature)
• Analog value from PLC to be indicated on the display
Digital Output:
1)
• Extended diagnostic block
• Level limiter
• Sensor block measurement on
• Sensor block save history on
• Status output
• Identification & Maintenance
Simple device identification via control system and nameplate
• Automatic Ident Number Adoption
GSD compatibility mode with respect to the previous device Levelflex M FMP4x
• Physical Layer Diagnostics
Installation check of the PROFIBUS segment and the Levfelflex FMP4x via
terminal voltage and telegram monitoring
• PROFIBUS Up-/Download
Up to 10 times faster reading and writing of parameters via PROFIBUS Up-/
Download
• Condensed Status
Simple and self-explanatory diagnostic information due to categorization of
diagnostic messages
452B48 hex
1022 hex
02 hex
Information and files can be found:
• www.endress.com
• www.fieldbus.org
6.01
IT080500
yes
yes; default: Basic Device
Default: 247 (0xF7)
Following methods are supported:
• Restart
• ENP Restart
• Setup
• Linearization
• Self Check
44
50
1
0
10
43
0
43
43
11