Insert A Memory Card; Charge The Battery; Record A Video - Rollei Actioncam 550 Touch User Manual

3.2 Insert a Memory Card

Insert a MicroSD card into the SD card slot.
NOTE:
1. We suggest to use Class 10 (or higher) Micro SD cards for s smooth recording. Lower Class of the Micro SD Cards
may cause the video blur or frame drops.
2. There is only one correct direction to insert the SD Card into the slot. Do not force the card into the card slot as it
may damage both the SD Card and camera.
3. A new Micro SD Card should be formatted before using.

3.3 Charge the battery

Before using the AC 550 Touch for the first time, please fully charge the battery.
1. Connect the AC 550 Touch with an USB-charger or USB-device by Mini USB cable.
2. Charging Indicator B turns red during charging.
3. A complete empty battery takes approximately 2.5 hours to get fully charged.
The red indicator turns off after the battery is fully charged.
4. When the battery is going to run empty, the red indicator B blinks twice a second.
5. Some functions, such as Wi-Fi, are unavailable if the battery is in lower condition.
3.4 Insert camera into the waterproof case
1. Ensure the case is dry and clean.
2. Insert the camera and make sure the lens fits neatly in the lens cavity.
3. Close the locking clamps.
4. The waterproof case can be mounted, using the accessories in the box.

3.5 Record a video

Press Shutter button (B) when powered on, LED B turns green and keep blinking twice a second; Press Shutter button (B)
again to stop, and the LED B light turns off.