Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rollei Actioncam 400
Summary of Contents for Rollei Actioncam 400
- Page 1 Rollei Action Camera 400 ...
-
Page 2: Table Of Contents
Table of contents Contents Table of Contents....................1 Safety Precautions....................2 What’s in the Box....................3 Product Diagram....................4 Remote Diagram....................5 Setup Your Rollei Actioncam 400................6 Video Mode......................7 Video Settings.......................8 General Settings....................10 Picture Mode......................13 Using Your Rollei Actioncam 400…..............16 Playback Mode....................18 Wi‐Fi Setup......................19 Saving and Viewing Options................21 Installing Rollei Actioncam 400 into waterproof case.........22 FAQ........................23 Specifications....................24 System Requirements.................24 Declaration....................25 License statement………………………………………………………………………………………..…26 ... -
Page 3: Safety Precautions
Safety Precautions Before using the Rollei Actioncam 400, please ensure you read and understand the safety precautions. Do not attempt to open the case of the camera or modify it in any way. If the camera has been opened, the warranty will be void. Maintenance and repairs can only be performed by Rollei. Keep the camera away from water and other liquids (unless used in the waterproof case). Do not handle the Rollei Actioncam 400 with wet hands (unless used in the waterproof case). This may cause the camera to malfunction. Recharge the battery using the micro USB Connector. The Rollei Actioncam 410 should not be used if outside the temperature ℃ 14℉~140℉).. range of ‐10℃~ 60 ( DO NOT drop the Rollei Actioncam 400. Avoid placing heavy objects on the Rollei Actioncam 400. Do not dispose of this unit in domestic waste. ... -
Page 4: What's In The Box
Please ensure the product package has the following contents: A Rollei Actioncam 400 H Flat mount B Waterproof case I 3M adhesive ... -
Page 5: Product Diagram
Product Diagram A WI‐FI Activation (Down select) F POWER(and menu) B LED power indicator G USB interface ... -
Page 6: Remote Diagram
Remote Diagram Please note: with the remote controller you cannot turn the camera on. Please ensure the camera is switched on before using the remote. A LED Indicators B Shoot Photo C ... -
Page 7: Setup Your Rollei Actioncam 400
Setup Your Rollei Actioncam 400 Turn the camera on‐press and hold the POWER button for several seconds. When the camera is on, the Rollei logo will appear on the screen and the three red LED lights will glow red. The camera is now in video mode. ... -
Page 8: Video Mode
Video Mode Video mode screen Once the camera is turned on, it goes to the video capture mode by default. Press SHOOT button to start recording. When the recording starts, you will see the red lights start flashing. To end recording, press the SHOOT button again. To enter the Settings menu, press the POWER button (press and release immediately‐if it is held too long the camera will switch off). Note: The Setup menu is depending on the active mode. If the video mode is active, it will display video capture settings or if the Picture mode is active, it will display the Image capture settings. ... -
Page 9: Video Settings
Video Settings Video Settings Screen (Page 1) ... - Page 10 2 Min‐In this mode, camera will generate new file on every 2mins 5 Min‐In this mode, camera will generate new file on every 5mins White Balance Factory default is Auto. If you switch Auto OFF, remember to adjust when lighting conditions change. Following pre‐set modes are also available Daylight, Cloudy, Tungsten, Fluor Microphone SELECT Outdoor or Car to record in different scenes with better audio effect, SELECT OFF for video only. PIV This will enable auto image capture during the video recording: Off‐Disable Auto Image Capture 10 Sec‐Auto capture on every 10 sec 20 Sec‐Auto capture on every 20 sec 30 Sec‐Auto capture on every 30 sec 60 Sec‐Auto capture on every 60 sec ...
-
Page 11: General Settings
Video Settings Screen (Page 2) Date Stamp Off: to turn off displaying date stamp on captures Date: to display date on captures Date & Time: to display date& time on captures General Settings ... - Page 12 Navigation: Use Wi‐Fi button to navigate, SHOOT button to Enter/Confirm selection, POWER button to go back. Auto Power Off To set Auto Power off function Auto LCD Off This will determine if the LCD will turn off after 1 min, 3 min or 5 min. Press any key to turn the screen on. Select OFF to keep the screen always ON. Screen rotation To rotate the screen. Date & Time This allows user to adjust the date &time. Note: Use the Wi‐Fi button to change the date and time, use SHOOT button to confirm. The date is entered in Year/Month/Day format. Time is based on a 24hr clock. ...
- Page 13 General Setting Screen (Page 2) Language To select the device language Light Frequency Selecting the correct light frequency will avoid the possibility for strobing. System Factory Reset; to reset the camera to factory default. ...
-
Page 14: Picture Mode
Wi‐Fi SSID Set up your new Wi‐Fi name. Note: Use the Wi‐Fi button to navigate, use SHOOT button to confirm. The name is entered in “ Wi‐Fi_CAM_000” format, you can only change the last three numbers which are displayed with cycle numbers. Format This is to format the card. Choosing to format the card will permanently erase all data on the card. Picture Mode This mode will allow users to take snapshots ... - Page 15 You will see P( )on top left corner of the screen Press SHOOT button to take snapshots Picture Settings Picture Setting Screen (Page 1) To enter the SETUP menu for Picture Mode, press POWER button (press and ...
- Page 16 White Balance Factory default is Auto. If you switch Auto OFF, remember to adjust when lighting conditions change. ISO This is the measurement of how sensitive a digital camera’s sensor is to light. Picture Setting Screen (Page 2) Exposure This allows user to set the light exposure value Self‐timer This allows user to set the timer for auto image capture Date & Time This allows user to adjust the date &time ...
-
Page 17: Using Your Rollei Actioncam 400
Procedure: 1. Connect Rollei Actioncam 400 to a computer (or other USB power source) using the USB cable (provided). ... -
Page 18: Insert The Micro Sd
indicator lights will turn off when the battery is fully charged. When the battery is nearly running flat, some functions of the camera will be not allowed to use, such as Wifi function. Insert the Micro SD* It is recommended to use Class 6 (or higher) Micro SD card to shoot smooth video files. Lower class cards may cause the video to be blurry or jerky. There is only one correct direction to insert the Micro SD card into the slot. Do not force the card into the card slot, as it may damage both the camera and the card. It is recommended to format new cards of cards that have been previously used in other cameras. To format the Micro SD card: Note: Formatting the card will permanently delete the contents. Video Recording Once the camera is turned on, it goes to the video capture mode by default. Press SHOOT button to start recording. When the recording starts, you will see the red lights start flashing. To end recording, press the SHOOT button again. ... -
Page 19: Playback Mode
Image Capturing To take snapshot, you will need to switch the camera from video mode to image capture mode. To enter this mode: Turn the camera on Press and hold the SHOOT button for 3secs You will see on top left corner of the screen Playback Mode Navigation: Use Wi‐Fi button to navigate, SHOOT button to Enter/Confirm selection, POWER button to go back. This will allow you to watch the captured videos & images. Enter the Picture mode first, then press and hold the SHOOT button for 3secs. To watch a captured video, go to VIDEO and select the file. To view a captured image, go to IMAGE. To view a loop recording, go to LOOP. To delete the image, select the file and Press POWER button. You will see delete option there. You can select the option to delete a single file or all files. ... -
Page 20: Wi-Fi Setup
To exit Playback mode press and hold the SHOOT button to return to the normal recording mode. Connecting to TV You can display the camera LCD screen on a TV screen. Note: You will need a Mini HDMI to HDMI cable. Turn the camera on Connect Mini HDMI end to the port on camera and HDMI end to HDMI port on the TV Select the right source on the TV Turn the camera on Wi‐Fi Setup The Rollei Actioncam 400 allows full camera control, live previewing and playback of photos/videos on most Smartphones and Tablets. 1. Download the App “Rollei 400/410” from “Google Play” or from the Apple “App Store”. Rollei 400/410 2. Activate Wi‐Fi on your Rollei Actioncam 400 by pressing Wi‐Fi button. ... -
Page 21: App Interface Diagram
3. Go to the Wi‐Fi settings on your Phone, you will see Wi‐Fi_CAM_000 in the list of available Wireless networks. Note: You can change the Wi‐Fi name in the menu setting. 4. Connect your Phone to the “Rollei 400/410” via Wi‐Fi. 5. The default Wi‐Fi Password for the Rollei Actioncam 400 is: 1234567890 Note: You can change the Wi‐Fi password in the menu setting. 6.Open the app “Rollei 400/410” Important: Before connecting camera via Wi‐Fi, you need to download the ‘Rollei 400/410’ App on your smart phone or tablet. App Interface Diagram Battery Icon Video Resolution Settings Playback Mode Switch Photo/Mode ... -
Page 22: Saving And Viewing Options
Saving and Viewing Options Transferring files to PC Use the USB cable supplied (M) to connect the camera to your computer. The camera LCD will display MSDC icon and your computer will see your camera as an external storage device. Alternatively you can remove the Micro SD card and use a card reader (not included) to achieve the same result. 1.Select the file(s) you want to transfer to your computer by highlighting them. 2.Either drag the files to the desired place on your computer (this will make a copy of the file on your computer) OR right‐click the file, select “Copy” and right‐click in the desired place in your computer and select “Paste”. Note: You can also transfer entire folders of pictures / videos to your computer. Using the camera as a Webcam Connect the camera to PC using supplied USB cable, when you see MSDC on the camera LCD screen, press and hold the SHOOT button for 3secs. Then you will see PCCAM on the camera Screen. Note: You will not be able to record when the camera is on PCCAM mode. ... -
Page 23: Installing Rollei Actioncam 400 Into Waterproof Case
Installing Rollei Actioncam 400 into waterproof case The Rollei Actioncam 400 is designed to be used in the waterproof case (B). Before inserting the Rollei Actioncam 400 in the case, select video or picture mode. Notes: Ensure the case is dry and clean. Insert Rollei Actioncam 400, ensuring the lens fits neatly in the lens cavity. Close the security latch. The Rollei Actioncam 400 can be mounted using the accessories provided. ... -
Page 24: Faq
FAQ Q. Why are the red LEDs flickering？ A. The battery is running low. You must recharge the camera. Q. My Rollei Actioncam 400 will NOT turn on. Why? A. The battery is flat. You need to recharge it (full recharge from flat will take about 5 hours). Q. My Rollei Actioncam 400 turns off automatically. Why? A: The battery is running flat or you set auto power off function. Q. Videos and pictures are blurred. Why? A: The lens may be dirty. Clean the lens first. Q. My Rollei Actioncam 400 cannot be seen by my computer. Why? A: Try a different USB cable or different USB port. ... -
Page 25: Specifications
Specifications Underwater Down to 30m (with waterproof casing) Sensor 3.0 megapixels CMOS sensor Video: 1080P@30fps,720P@60fps, 720P@30fps Resolution Still photo: 3 megapixels (12 megapixels interpolated) Storage type Micro SD card up to 32GB (not included) Lens 150°‐view fixed lens Lens aperture F/2.5 f=2.65mm Lens focus 0.5m to infinity Shutter speed 1/30 to 1/2000 sec Video Looping OFF, every 2min, every 5min Sensitivity Automatic ISO 100‐200 Microphone Built‐in Display 2” TFT LCD Video: MOV H.264 Format Still photo: JPEG Power supply 3.7V/1000mAh removable Li‐Battery Battery life Video: about 2.0 hours without Wi‐Fi Dimensions 54x37x51mm Casing 49.5x76x84mm System Requirements Operating System Windows XP / Vista / 7 / 8 / MAC OS App Requirements ... -
Page 26: Declaration
Declaration The Manufacturer hereby declares that the CE marking was applied to the Rollei Actioncam 400 in accordance with the basic requirements and other relevant provisions of the following CE Directives: 2011/65/EC RoHs Directive ... -
Page 27: License Statement
Device‐related changes have been made to this software for the product in question. The source text of the software implemented in the product in question can be obtained in response to an enquiry sent to the e‐mail address info@rollei.com In this instance your e‐mail must contain details of what the relevant product is, the relevant serial number and documentary evidence of your commercial source of supply as well as documentary evidence of the date on which the ... - Page 28 of the source text of the implemented software for a period of at least three years from date of purchase from the trade source of supply where the trade source of supply has sourced the product from us directly or via strictly trade‐only dealers. ...