Sensor Controls Under The Display - Miele M 7140 TC Operating Instructions Manual

Control elements

Sensor controls under the display

Sensor Function
control
 Use this sensor control to start the Quick microwave function.
The cooking programme runs at the maximum power level
(900 W) and for a cooking duration of 1 minute (see "Quick
microwave" section in the "Operation" chapter). Touching this
sensor control repeatedly increases the cooking duration in set
stages.

Depending on which menu you are in, this sensor control will
take you back a level or back to the main menu.
If a cooking programme is in progress, use this sensor control to
stop and cancel the programme by pressing it again.
 
In the navigation area, use the arrow buttons or the area
between them to scroll up or down in the selection lists. The
      
display shows the menu option that you want to select.
You can change the values and settings using the arrow buttons
or the area between them.
OK If a function appears in the display, you can select it by pressing
OK. The selected function can then be changed.
Confirm with OK to save changes.
If information appears in the display, select OK to confirm the
message.

You can use this sensor control to set a minute minder (e.g. for
cooking eggs) at any point, even when a cooking programme is
running at the same time.
You can also use this sensor control to programme cooking
durations.

Use this sensor control to start a cooking programme.
27