Gigabyte MW32-SP0 User Manual page 52

Parameter
BIOS LOCK
ME FW Image Re-Flash
SATA And RST Configuration
Description
Enable/ Disable the PCH BIOS Lock Enable feature. When enabled,
ensures the SMM protection of flash.
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/ Disable ME FW Image Re-Flash function.
Options available: Enabled/Disabled. Default setting is Disabled.
Press [Enter] to configure advanced items.
SATA Mode Selection
Š
– Configures on chip SATA type.
– AHCI Mode: When set to AHCI, the SATA controller enables its
AHCI functionality. Then the RAID function is disabled and cannot
be access the RAID setup utility at boot time.
– Intel RST Premium with Intel Optane System Acceleration Mode:
When set to RST Premium with Intel Optane System Acceleration
for the SATA controller, you will be allowed to access the RAID
setup utility at boot time.
– Options available: AHCI/Intel RST Premium with Intel Optane
System Acceleration. Default setting is AHCI.
SATA Port 0/1/2/3/4/5
Š
– The category identifies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.
Hot Plug
Š
– Enable/ Disable the hot plug capability for each SATA port.
Options available: Enabled/Disabled. Default setting is Disabled.
- 51 - BIOS Setup