Gigabyte MW32-SP0 User Manual page 37

Parameter
OEM Flags Settings
MEBx Resolution Settings
(Note) Network Access must be activated from MEBx Setup for this screen to be displayed.
BIOS Setup
Description
Press [Enter] to configure advanced items.
MEBx Hotkey Pressed
Š
– Enable/Disable automatic MEBx hotkey press.
– Options available: Enabled/Disabled. Default setting is
Disabled.
MEBx Selection Screen
Š
– Enable/Disable MEBx Selection Screen.
– Options available: Enabled/Disabled. Default setting is
Disabled.
Hide Unconfigure ME Confirmation Prompt
Š
– Enable/Disable Hide Unconfigure ME confirmation
prompt when attempting ME unconfiguration.
– Options available: Enabled/Disabled. Default setting is
Disabled.
MEBx OEM Debug Menu Enable
Š
– Enable/Disable OEM debug menu in MEBx.
– Options available: Enabled/Disabled. Default setting is
Disabled.
Unconfigure ME
Š
– Enable/Disable Unconfigure ME with resetting MEBx
Password to default.
– Options available: Enabled/Disabled. Default setting is
Disabled.
Press [Enter] to configure advanced items.
Non-UI Mode Resolution
Š
– Configure resolution for non-UI text mode.
– Options available: Auto, 80x25, 100x31. Default setting
is Auto.
UI Mode Resolution
Š
– Configure resolution for UI text mode.
– Options available: Auto, 80x25, 100x31. Default setting
is Auto.
Graphics Mode Resolution
Š
– Configure resolution for graphics mode.
– Options available: Auto, 640x480, 800x600, 1024x768.
Default setting is Auto.
- 36 -
(Note)