Table of Contents
Advertisement
1
2
3
4
11
Line In Jack (Blue)
12
13
2
3
4
5
The default Line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc
Line Out Jack (Green)
12
13
The default Line Out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be
3
4
5
6
used to connect front speakers in a 4/5.1/7.1-channel audio configuration.
Mic In (Pink)
13
The default MIC In jack. A microphone can be connected to the MIC In jack.
Connection/
Speed LED
Link/Activity LED
LAN Port
• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
Hardware Installation
5
6
7
8
6
7
8
9
7
8
9
10
Connection/Speed LED:
State
Description
Yellow On
1 Gbps data rate
Green On
100 Mbps data rate
Off
10 Mbps data rate
10
9
10
Activity LED:
State
Blinking Data transmission or receiving is occurring
Off
- 17 -
Description
No data transmission or receiving is occurring
Advertisement
Table of Contents
