Fixture Information - Prolight elumen8 User Manual

6) Factory
Versions:
8: Information
xx°C xx°C xx°C xx°C
UID:
www.prolight.co.uk
Factory reset:
Factory
Yes
Resets all the fixtures factory settings.
To access the factory setting reset, press the
Factory
"MODE" button until "7: Settings" is highlighted
No
on the OLED display. Press the "SET" button and
use the "UP" and "DOWN" buttons to select
"6) Factory". Press the "SET" button and use the
"UP" and "DOWN" buttons to select between
"Yes" and "No". Press the "SET" button to
perform the factory reset when yes is selected.

Fixture information:

Displays the fixtures version, each pods
temperature and RDM ID.
To display the fixture information, press
the "MODE" button until "8: Information" is
highlighted on the OLED display. Press the
"SET" button and the fixtures version, each pods
temperature and RDM ID will be displayed.
Fury 400 DTW 4 Cell Blinder User Manual
Operating instructions
13