Prolight elumen8 User Manual page 8

IMPORTANT! PLEASE NOTE: The OLED display for this fixture has a menu locking function where
after 30 seconds of inactivity it will lock. To unlock the menu hold the "MODE" and "SET" buttons
for 3 seconds.
Main Menu - Defaults are in grey
1: Auto
2: Program
2) Colour:
2) Speed:
3) Strobe:
www.prolight.co.uk
Auto
Yes
Auto
No
Program Mode
Program
xx
1) Mode:
Colour Preset
Program
xx
Program Speed
Program
xx
Strobe Speed
Program
xx
Fury 400 DTW 4 Cell Blinder User Manual
Operating instructions
Auto mode:
To access auto mode, press the "MODE" button
until "1: Auto" is highlighted on the OLED display.
Press the "SET" button and use the "UP" and
"DOWN" buttons to select between "Yes" and
"No". Press the "SET" button to enter auto mode
when yes is selected.
Built-in programs:
To access the built-in programs, press the
"MODE" button until "2: Program" is highlighted
on the OLED display. Press the "SET" button and
use the "UP" and "DOWN" buttons to highlight
"1) Mode". Press the "SET" button and use the
"UP" and "DOWN" buttons to select the program
mode required between 01-23. Press the "SET"
button to confirm the setting.
If program mode 01 is selected use the "UP" and
"DOWN" buttons to highlight "2) Colour". Press
the "SET" button and use the "UP" and "DOWN"
buttons to select the colour required between
01-21. Press the "SET" button to confirm the
setting.
If program mode 02-23 is selected use the "UP"
and "DOWN" buttons to highlight "2) Speed".
Press the "SET" button and use the "UP" and
"DOWN" buttons to select the speed required
between 001-100. Press the "SET" button to
confirm the setting.
Now use the "UP" and "DOWN" buttons to
highlight "3) Strobe". Press the "SET" button and
use the "UP" and "DOWN" buttons to select the
strobe speed required between 00-99.
Press the "SET" button to confirm the setting.
8