Prolight elumen8 User Manual page 12

3) Dmx Fail
4) Dmx Sync
www.prolight.co.uk
1) Blackout
2) Hold
3) Auto
4) Program
Dmx Sync
On
Dmx Sync
Off
Lock
5) Lock
On
Lock
Off
Fury 400 DTW 4 Cell Blinder User Manual
Operating instructions
DMX fail setting:
Sets what the fixture does when the DMX signal
is lost. To access the DMX fail setting, press the
"MODE" button until "7: Settings" is highlighted
on the OLED display. Press the "SET" button and
use the "UP" and "DOWN" buttons to select
"3) Dmx Fail". Press the "SET" button and use
the "UP" and "DOWN" buttons to select between
"Blackout", "Hold", "Auto" and "Program".
Press the "SET" button to confirm the setting.
Dmx synchronisation:
To access the DMX sync setting, press the
"MODE" button until "7: Settings" is highlighted
on the OLED display. Press the "SET" button and
use the "UP" and "DOWN" buttons to select
"4) Dmx Sync". Press the "SET" button and use
the "UP" and "DOWN" buttons to select between
"On" and "Off". Press the "SET" button to enable
Dmx sync when yes is selected.
Please note: The DMX Synchronisation setting
should be set to on when using the built-in
presets via DMX to ensure the fixtures stay
synchronised.
Display lock:
To access the display lock setting, press the
"MODE" button until "7: Settings" is highlighted
on the OLED display. Press the "SET" button and
use the "UP" and "DOWN" buttons to select
"5) Lock". Press the "SET" button and use the
"UP" and "DOWN" buttons to select between
"On" and "Off". Press the "SET" button to enable
Display Lock when yes is selected.
Please note: After 30 seconds of inactivity the
display will lock. To unlock the menu hold the
"MODE" and "SET" buttons for 3 seconds.
12