Prolight elumen8 User Manual page 11

6: Halogen 1) Halogen 1
2) Halogen 1
3) Halogen 2
4) Halogen 2
7: Settings 1) Curves Select
2) Dimmer
www.prolight.co.uk
Halogen 1
xxx
Halogen 2
xxx
Halogen 3
xxx
Halogen 4
xxx
Default
000
1) Linear
2) Square Law
3) Inv Square
Law
4) S-Curve
Fast
Speed
Smooth
Fury 400 DTW 4 Cell Blinder User Manual
Operating instructions
Manual halogen mode:
To access the manual halogen dimming mode,
press the "MODE" button until "6: Halogen" is
highlighted on the OLED display. Press the "SET"
button and use the "UP" and "DOWN" buttons to
select between Pods 1-4. Press the "SET" button
and use the "UP" and "DOWN" buttons to adjust
the brightness between 000-255.
Press the "SET" button to confirm the setting.
Dimming curve:
To access the dimming curve setting, press the
"MODE" button until "7: Settings" is highlighted
on the OLED display. Press the "SET" button and
use the "UP" and "DOWN" buttons to select
"1) Curves Select". Press the "SET" button and
use the "UP" and "DOWN" buttons to select
between "Linear", "Square Law", "Inv Square
Law" and "S-Curve". Press the "SET" button to
confirm the setting.
Dimming speed:
To access the dimming speed setting, press the
"MODE" button until "7: Settings" is highlighted
on the OLED display. Press the "SET" button and
use the "UP" and "DOWN" buttons to select
"2) Dimmer Speed". Press the "SET" button
and use the "UP" and "DOWN" buttons to select
between "Fast" (LED) or "Smooth" (Halogen).
Press the "SET" button to confirm the setting.
11