Equinox MaxiPar Plus TABLE OF CONTENTS 1. Safety Instructions 2. Technical Specifications 3. How to set the Unit 4. DMX 512 Address setting 5. How to control the Unit 6. Troubleshooting 7. Fixture Cleaning User Manual Order code: EQLED110...
1. Safety Instructions Do not open the unit within five minutes after switching off. The housing and lenses must be replaced if they are visibly damaged. This lighting fixture is for professional use only - it is not designed for or Please read the instructions carefully as they include important information about installation, usage and maintenance.
Weight: 1.05kg Sound SU00 SU 00~99 Sensitivity Power socket: IEC power input/output 2CH/3CH/4CH/ 2/3 channel mode Channel Mode 4/7 channel mode XLR sockets: 3-Pin XLR input/output DMX Address A001 A001 – A512 3. How to set the Unit 3.1 Control Panel 3.2 Main Functions To select any of the given functions, press the MENU button up to where the required function is showing on the display.
(FA00-99) or (FF00-99) mode. Once the mode has been selected, 5.2. Universal DMX Controller press the ENTER button to confirm. By using a universal DMX controller to control the units, you will need to set a DMX address from 1 to 512 so that the units can receive a DMX signal. Press the MENU button until is showing on the display.
Page 5
4 CHANNEL MODE 4. Optional IR Remote Channel Value Function 000-255 Red 0-100% 000-255 Green 0-100% 000-255 Blue 0-100% 000-255 UV 0-100% 7 CHANNEL MODE Value Function Channel 000-255 Master dimmer 000-255 Strobe (slow-fast) 000-255 Red (0-100%) 000-255 Green (0-100%) 000-255 Blue (0-100%) Button functions:...
5) Now press the “DMX MODE” button to save the new address into memory. water. • Always dry the parts carefully. Important notes: • Clean the external optics at least every 20 days. • Set the DMX address on each fixture before plugging into the DMX controller. -------------------------------------www.prolight.co.uk------------------------------------------...