Prolight elumen8 User Manual page 9

Main Menu - Defaults are in grey
3: DMX
1) Address:
2) Channels:
4: Slave
www.prolight.co.uk
DMX Address
DMX
xxx
DMX Channels
DMX
xx
Slave
Yes
Slave
No
Fury 400 DTW 4 Cell Blinder User Manual
Operating instructions
DMX address:
To access the DMX address setting, press the
"MODE" button until "3: DMX" is highlighted on
the OLED display. Press the "SET" button and use
the "UP" and "DOWN" buttons to highlight
"1) Address". Press the "SET" button and use
the "UP" and "DOWN" buttons to select the DMX
address required between 001-512. Press the
"SET" button to confirm the setting.
DMX channel:
To access DMX channel mode, press the "MODE"
button until "3: DMX" is highlighted on the OLED
display. Press the "SET" button and use the "UP"
and "DOWN" buttons to highlight
"2) Channels". Press the "SET" button and use
the "UP" and "DOWN" buttons to select the DMX
channel required 01/04/04/07/09/18/20/23
or 27 selectable. Press the "SET" button to
confirm the setting.
Slave mode:
To access slave mode, press the "MODE" button
until "4: Slave" is highlighted on the OLED
display. Press the "SET" button and use the "UP"
and "DOWN" buttons to select between "Yes"
and "No". Press the "SET" button to enter slave
mode when yes is selected.
9