Ftypical Installation - Larius GHIBLI 24:1 DE Operating And Maintenance Instruction Manual

Pneumatic pump for extrusion
Table of Contents

Advertisement

CONNECTION BETWEEN PUMP, FLEXIBLE HOSE AND
SPRAY GUN BEFORE USING THE EQUIPMENT.
ALWAYS USE THE FLEXIBLE HOSE SUPPLIED WITH
STANDARD KIT. THE USE OF ANY ACCESSORIES OR
TOOLING OTHER THAN THOSE RECOMMENDED IN
THIS MANUAL, MAY CAUSE DAMAGE OR INJURE THE
OPERATOR.
THE FLUID CONTAINED IN THE FLEXIBLE HOSE CAN
BE VERY DANGEROUS. HANDLE THE FLEXIBLE HOSE
CAREFULLY. DO NOT PULL THE FLEXIBLE HOSE TO
MOVE THE EQUIPMENT. NEVER USE A DAMAGED OR
A REPAIRED FLEXIBLE HOSE.
The high speed of travel of the product in
the hose can create static electricity through
discharges and sparks. It is suggested to earth
the equipment. The pump is earthed through
the earth cable of the supply.
The gun is earthed through the high pressure flexible hose.
All the conductors near the work area must be earthed.
NEVER SPRAY OVER FLAMMABLE PRODUCTS OR
SOLVENTS IN CLOSED PLACES.
NEVER USE THE TOOLING IN PRESENCE OF POTEN-
TIALLY EXPLOSIVE GAS.
Always check that the product is compatible with
the materials composing the equipment (pump,
spray gun, flexible hose and accessories)
with which it can come into contact. Never
use paints or solvents containing Halogen
Hydrocarbons (as the Methylene Chloride). If these
products come into contact with aluminium parts can
provoke dangerous chemical reactions with risk of
corrosion and explosion.
Avoid approaching too much to the pump
piston rod when the pump is working or under
pressure. A sudden movement of the piston rod
can cause wounds or finger squashing.
IF THE PRODUCT TO BE USED IS TOXIC, AVOID INHALATION
AND CONTACT BY USING PROTECTION GLOVES, GOGGLES
AND PROPER FACE SHIELDS.
TAKE PROPER SAFETY MEASURES FOR THE PROTECTION
OF HEARING IN CASE OF WORK NEAR THE PLANT.
GHIBLI 24:1 DE
TYPICAL INSTALLATION
F
GHIBLI PUMP 24 :1 DE is usually supplied complete with shovel
plate and fastened on a double post ram (see illustration). The
double post ram allows to suck the product directly from the drum
and to replace the drum quickly. The shovel plate, fastened at the
base of the pump, compresses the material ensuring a constant
flow of product. In addition, it protects the material not yet sucked
in against powder and moisture and also against drying which is
caused by the contact with air.
1
1
Pos.
Code
1
510500
2,
510776
3
96870
4
510600
5
510770
6
96805
6
3
2
3
2
Description
Double post ram
Shovel plate for 200 litres drums
GHIBLI pump 24:1
Double post ram mounted on trolley
Shovel plate for 30 litres drums
Medium GHIBLI pump 24:1

Advertisement

Table of Contents
loading

Table of Contents