Accessing The Web Gui; Creating Additional Web Interface Users; Deleting The Default Username And Password - Ruckus Wireless ICX Series Quick Start Manual

Accessing the Web GUI

You can now access the web interface of the switch. Enter the IP address of the switch into the address bar using either HTTP or
HTTPS; for example, https://192.168.2.79/.

Creating Additional Web Interface Users

The first task is creating usernames and passwords to secure access to the switch. This is done on the User Account page, which
can be found under Configure > System > Management > User Account.
FIGURE 5 Accessing the User Account Page
Users can be created with one of three permission levels: Read-Write, Port-Config, or Read-Only.
TABLE 1 Permission Levels
Level
0 Read-Write
4 Port-Config
5 Read-Only

Deleting the Default Username and Password

If the default username and password were used for the initial configuration, they must be deleted to protect the system. Once
you have created a new Read-Write user, delete the existing users and save the configuration.
FIGURE 6 Replacing the Default Username and Password
Ruckus ICX Switch Quick Start Guide
Part Number: 53-1004910-03
Description
Full read-write access for all system parameters.
Read-write access for specific ports, but not for global system parameters.
Read-only access for configuration and system parameters.
Accessing the Web GUI
Deleting the Default Username and Password
9