Advertisement
Painting the FreeVision Antenna
The FreeVision antenna can be painted as long as the metal prongs of the
forward elements and the matching transformer forks are not painted. If
you choose to paint the antenna, cover the two circled areas with tape
before painting. If these areas are painted, your antenna will NOT work,
and you will void your warranty.
Forward
Elements
To prevent paint from easily flaking, use a primer when painting the antenna.
Troubleshooting
Issue
I am not getting channels.
One channel is missing.
The picture or sound freezes
while I am watching a channel,
or there are boxes in the picture.
For help, email help@winegard.com or call 1-800-788-4417
5
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Possible Cause
Try running a new channel scan
on the TV. Try the antenna in a
new location. Something may be
obstructing the signal.
Try turning the antenna 10 or 20
degrees in either direction to avoid
reflection or to better optimize the
signal, or try moving the antenna
to a new location.
Try running a new channel scan on
the TV. Refer to the channel scan
insert for more information.
This is often caused by a weak
or intermittent signal. Try moving
the antenna to a better location or
aiming it directly at the tower for
t his channel.
Matching
Transformer
Advertisement
