Checking The Network Connection - Sony BRAVIA 4-106-868-13(1) Operating Instructions Manual

Checking the Network
Connection
If your home network has a DHCP server, this
step can be skipped.
Enter the respective (alphanumeric) values for
your router. The items that need to be set may
differ, depending on the Internet service
provider or the router. For details, refer to the
instruction manuals that have been provided
by your Internet service provider or supplied
with the router.
1
Press HOME.
2
Press G/g to select "Settings."
3
Press F/f to select "Network Settings",
then press .
4
Select "Network", then press
5
Select "IP Address Settings", then press
.
6
Select an item, and press
When you select "DHCP (DNS
automatic)"
Go to step 7.
When you select "DHCP (DNS manual)"
Set "Primary DNS"/"Secondary DNS"
using F/f/g and the number buttons.
When you select "Manual"
Set the following items using F/f/g and
the number buttons.
• IP Address
• Subnet Mask
• Default Gateway
• Primary DNS/Secondary DNS
If your ISP has a specific proxy server
setting
Press OPTIONS, then press F/f to select
"Proxy Set-up" and press
the settings.
7
Press .
8
Press F/f to select "Test", then press
9
Press G/g to select "Yes", then press
The network diagnostic starts.
When the message "Connection
successful." appears, press
repeatedly to exit.
32
GB
z
• If "Connection successful." does not appear, see
.
.
. Then enter
.
.
RETURN
"Troubleshooting" on page 51 and check the
connections and settings.