Table of Contents
Advertisement
Digital Set-up
Digital Tuning
Label
Assigns a name of your choice, up to five letters or numbers,
to the selected channel. This name will be displayed briefly
on the screen when the channel is selected.
To input characters, follow steps 1 to 3 of "Edit" (page 40).
AFT
Allows you to fine-tune the selected programme number
manually if you feel that a slight tuning adjustment will
improve the picture quality.
You can adjust the fine tuning over a range of –15 to +15.
When "On" is selected, the fine tuning is performed
automatically.
Audio Filter
Improves the sound for individual channels in the case of
distortion in mono broadcasts. Sometimes a non-standard
broadcast signal can cause sound distortion or intermittent
sound muting when watching mono programmes.
If you do not experience any sound distortion, we
recommend that you leave this option set to the factory
setting "Off."
~
• You cannot receive stereo or dual sound when "Low" or
"High" is selected.
LNA
Improves the picture quality for individual channels in the
case of very weak broadcast signals (noisy picture).
If you cannot see any improvement in the picture quality even
if you set to "On", set this option to "Off" (factory setting).
Skip
Skips unused analogue channels when you press PROG +/–
to select channels. (You can still select a skipped channel
using the number buttons.)
Decoder
Shows and records the scrambled channel selected when
using a decoder connected directly to scart connector
VCR/DVD recorder.
~
• Depending on the country selected for "Country" (page 6),
this option may not be available.
Confirm
Saves changes made to the "Manual Programme Preset"
settings.
Digital Auto
Tunes in the available digital channels.
Tuning
This option allows you to retune the TV after moving house,
or to search for new channels that have been launched by
broadcasters. For details, see step 6 of "5: Performing the
initial set-up" (page 6).
AV1, or to scart connector
/
/
/
AV2 via a
43
(Continued)
GB
Advertisement
Table of Contents
